11.4 The Foreign Include File

11.4.1 Argument Passing and Control

If Prolog encounters a foreign predicate at run time it will call a function specified in the predicate definition of the foreign predicate. The arguments 1, ... , <arity> pass the Prolog arguments to the goal as Prolog terms. Foreign functions should be declared of type foreign_t. Deterministic foreign functions have two alternatives to return control back to Prolog:

(return) foreign_t PL_succeed()

Succeed deterministically. PL_succeed is defined as return TRUE.

(return) foreign_t PL_fail()

Fail and start Prolog backtracking. PL_fail is defined as return FALSE.

11.4.1.1 Non-deterministic Foreign Predicates

By default foreign predicates are deterministic. Using the PL_FA_NONDETERMINISTIC attribute (see PL_register_foreign()) it is possible to register a predicate as a non-deterministic predicate. Writing non-deterministic foreign predicates is slightly more complicated as the foreign function needs context information for generating the next solution. Note that the same foreign function should be prepared to be simultaneously active in more than one goal. Suppose the natural_number_below_n/2 is a non-deterministic foreign predicate, backtracking over all natural numbers lower than the first argument. Now consider the following predicate:

quotient_below_n(Q, N) :-
        natural_number_below_n(N, N1),
        natural_number_below_n(N, N2),
        Q =:= N1 / N2, !.

In this predicate the function natural_number_below_n/2 simultaneously generates solutions for both its invocations.

Non-deterministic foreign functions should be prepared to handle three different calls from Prolog:

• Initial call (PL_FIRST_CALL)
  Prolog has just created a frame for the foreign function and asks it to produce the first answer.
• Redo call (PL_REDO)
  The previous invocation of the foreign function associated with the current goal indicated it was possible to backtrack. The foreign function should produce the next solution.
• Terminate call (PL_PRUNED)
  The choice point left by the foreign function has been destroyed by a cut. The foreign function is given the opportunity to clean the environment.

Both the context information and the type of call is provided by an argument of type control_t appended to the argument list for deterministic foreign functions. The macro PL_foreign_control() extracts the type of call from the control argument. The foreign function can pass a context handle using the PL_retry*() macros and extract the handle from the extra argument using the PL_foreign_context*() macro.

(return) foreign_t PL_retry(intptr_t value)

The foreign function succeeds while leaving a choice point. On backtracking over this goal the foreign function will be called again, but the control argument now indicates it is a `Redo' call and the macro PL_foreign_context() returns the handle passed via PL_retry(). This handle is a signed value two bits smaller than a pointer, i.e., 30 or 62 bits (two bits are used for status indication). Defined as return _PL_retry(n). See also PL_succeed().

(return) foreign_t PL_retry_address(void *)

As PL_retry(), but ensures an address as returned by malloc() is correctly recovered by PL_foreign_context_address(). Defined as return _PL_retry_address(n). See also PL_succeed().

int PL_foreign_control(control_t)

Extracts the type of call from the control argument. The return values are described above. Note that the function should be prepared to handle the PL_PRUNED case and should be aware that the other arguments are not valid in this case.

intptr_t PL_foreign_context(control_t)

Extracts the context from the context argument. If the call type is PL_FIRST_CALL the context value is 0L. Otherwise it is the value returned by the last PL_retry() associated with this goal (both if the call type is PL_REDO or PL_PRUNED).

void * PL_foreign_context_address(control_t)

Extracts an address as passed in by PL_retry_address().

predicate_t PL_foreign_context_predicate(control_t)

Fetch the Prolog predicate that is executing this function. Note that if the predicate is imported, the returned predicate refers to the final definition rather than the imported predicate, i.e., the module reported by PL_predicate_info() is the module in which the predicate is defined rather than the module where it was called. See also PL_predicate_info().

Note: If a non-deterministic foreign function returns using PL_succeed() or PL_fail(), Prolog assumes the foreign function has cleaned its environment. No call with control argument PL_PRUNED will follow.

The code of figure 6 shows a skeleton for a non-deterministic foreign predicate definition.

typedef struct                  /* define a context structure */
{ ...
} context;

foreign_t
my_function(term_t a0, term_t a1, control_t handle)
{ struct context * ctxt;

  switch( PL_foreign_control(handle) )
  { case PL_FIRST_CALL:
        ctxt = malloc(sizeof(struct context));
        ...
        PL_retry_address(ctxt);
    case PL_REDO:
        ctxt = PL_foreign_context_address(handle);
        ...
        PL_retry_address(ctxt);
    case PL_PRUNED:
        ctxt = PL_foreign_context_address(handle);
        ...
        free(ctxt);
        PL_succeed;
  }
}

11.4.2 Atoms and functors

The following functions provide for communication using atoms and functors.

atom_t PL_new_atom(const char *)

Return an atom handle for the given C-string. This function always succeeds. The returned handle is valid as long as the atom is referenced (see section 11.4.2.1). The following atoms are provided as macros, giving access to the empty list symbol and the name of the list constructor. Prior to version 7, ATOM_nil is the same as PL_new_atom("[]") and ATOM_dot is the same as PL_new_atom("."). This is no long the case in SWI-Prolog version 7.

atom_t ATOM_nil(ATOM_nil)

tomic constant that represents the empty list. It is adviced to use PL_get_nil(), PL_put_nil() or PL_unify_nil() where applicable.

atom_t ATOM_dot(ATOM_dot)

tomic constant that represents the name of the list constructor. The list constructor itself is created using PL_new_functor(ATOM_dot,2). It is adviced to use PL_get_list(), PL_put_list() or PL_unify_list() where applicable.

atom_t PL_new_atom_mbchars(int rep, size_t len, const char *s)

This function generalizes PL_new_atom() and PL_new_atom_nchars() while allowing for multiple encodings. The rep argument is one of REP_ISO_LATIN_1, REP_UTF8 or REP_MB. If len is (size_t)-1, it is computed from s using strlen().

const char* PL_atom_chars(atom_t atom)

Return a C-string for the text represented by the given atom. The returned text will not be changed by Prolog. It is not allowed to modify the contents, not even `temporary' as the string may reside in read-only memory. The returned string becomes invalid if the atom is garbage collected (see section 11.4.2.1). Foreign functions that require the text from an atom passed in a term_t normally use PL_get_atom_chars() or PL_get_atom_nchars().

functor_t PL_new_functor(atom_t name, int arity)

Returns a functor identifier, a handle for the name/arity pair. The returned handle is valid for the entire Prolog session.

atom_t PL_functor_name(functor_t f)

Return an atom representing the name of the given functor.

size_t PL_functor_arity(functor_t f)

Return the arity of the given functor.

11.4.2.1 Atoms and atom garbage collection

With the introduction of atom garbage collection in version 3.3.0, atoms no longer live as long as the process. Instead, their lifetime is guaranteed only as long as they are referenced. In the single-threaded version, atom garbage collections are only invoked at the call-port. In the multithreaded version (see chapter 9), they appear asynchronously, except for the invoking thread.

For dealing with atom garbage collection, two additional functions are provided:

void PL_register_atom(atom_t atom)

Increment the reference count of the atom by one. PL_new_atom() performs this automatically, returning an atom with a reference count of at least one.^{170Otherwise asynchronous atom garbage collection might destroy the atom before it is used.}

void PL_unregister_atom(atom_t atom)

Decrement the reference count of the atom. If the reference count drops below zero, an assertion error is raised.

Please note that the following two calls are different with respect to atom garbage collection:

PL_unify_atom_chars(t, "text");
PL_unify_atom(t, PL_new_atom("text"));

The latter increments the reference count of the atom text, which effectively ensures the atom will never be collected. It is advised to use the *_chars() or *_nchars() functions whenever applicable.

11.4.3 Analysing Terms via the Foreign Interface

Each argument of a foreign function (except for the control argument) is of type term_t, an opaque handle to a Prolog term. Three groups of functions are available for the analysis of terms. The first just validates the type, like the Prolog predicates var/1, atom/1, etc., and are called PL_is_*(). The second group attempts to translate the argument into a C primitive type. These predicates take a term_t and a pointer to the appropriate C type and return TRUE or FALSE depending on successful or unsuccessful translation. If the translation fails, the pointed-to data is never modified.

11.4.3.1 Testing the type of a term

int PL_term_type(term_t)

Obtain the type of a term, which should be a term returned by one of the other interface predicates or passed as an argument. The function returns the type of the Prolog term. The type identifiers are listed below. Note that the extraction functions PL_get_*() also validate the type and thus the two sections below are equivalent.

        if ( PL_is_atom(t) )
        { char *s;

          PL_get_atom_chars(t, &s);
          ...;
        }

or

        char *s;
        if ( PL_get_atom_chars(t, &s) )
        { ...;
        }

Version 7 added PL_NIL, PL_BLOB, PL_LIST_PAIR and PL_DICT. Older versions classify PL_NIL and PL_BLOB as PL_ATOM, PL_LIST_PAIR as PL_TERM and do not have dicts.

PL_VARIABLE	A variable or attributed variable
PL_ATOM	A Prolog atom
PL_NIL	The constant []
PL_BLOB	A blob (see section 11.4.7.2)
PL_STRING	A string (see section 5.2)
PL_INTEGER	A integer
PL_FLOAT	A floating point number
PL_TERM	A compound term
PL_LIST_PAIR	A list cell ([H|T])
PL_DICT	A dict (see section 5.4))

The functions PL_is_<type> are an alternative to PL_term_type(). The test PL_is_variable(term) is equivalent to PL_term_type(term) == PL_VARIABLE, but the first is considerably faster. On the other hand, using a switch over PL_term_type() is faster and more readable then using an if-then-else using the functions below. All these functions return either TRUE or FALSE.

int PL_is_variable(term_t)

Returns non-zero if term is a variable.

int PL_is_ground(term_t)

Returns non-zero if term is a ground term. See also ground/1. This function is cycle-safe.

int PL_is_atom(term_t)

Returns non-zero if term is an atom.

int PL_is_string(term_t)

Returns non-zero if term is a string.

int PL_is_integer(term_t)

Returns non-zero if term is an integer.

int PL_is_float(term_t)

Returns non-zero if term is a float.

int PL_is_callable(term_t)

Returns non-zero if term is a callable term. See callable/1 for details.

int PL_is_compound(term_t)

Returns non-zero if term is a compound term.

int PL_is_functor(term_t, functor_t)

Returns non-zero if term is compound and its functor is functor. This test is equivalent to PL_get_functor(), followed by testing the functor, but easier to write and faster.

int PL_is_list(term_t)

Returns non-zero if term is a compound term using the list constructor or the list terminator. See also PL_is_pair() and PL_skip_list().

int PL_is_pair(term_t)

Returns non-zero if term is a compound term using the list constructor. See also PL_is_list() and PL_skip_list().

int PL_is_atomic(term_t)

Returns non-zero if term is atomic (not variable or compound).

int PL_is_number(term_t)

Returns non-zero if term is an integer or float.

int PL_is_acyclic(term_t)

Returns non-zero if term is acyclic (i.e. a finite tree).

11.4.3.2 Reading data from a term

The functions PL_get_*() read information from a Prolog term. Most of them take two arguments. The first is the input term and the second is a pointer to the output value or a term reference.

int PL_get_atom(term_t +t, atom_t *a)

If t is an atom, store the unique atom identifier over a. See also PL_atom_chars() and PL_new_atom(). If there is no need to access the data (characters) of an atom, it is advised to manipulate atoms using their handle. As the atom is referenced by t, it will live at least as long as t does. If longer live-time is required, the atom should be locked using PL_register_atom().

int PL_get_atom_chars(term_t +t, char **s)

If t is an atom, store a pointer to a 0-terminated C-string in s. It is explicitly not allowed to modify the contents of this string. Some built-in atoms may have the string allocated in read-only memory, so `temporary manipulation' can cause an error.

int PL_get_string_chars(term_t +t, char **s, size_t *len)

If t is a string object, store a pointer to a 0-terminated C-string in s and the length of the string in len. Note that this pointer is invalidated by backtracking, garbage collection and stack-shifts, so generally the only save operations are to pass it immediately to a C function that doesn't involve Prolog.

int PL_get_chars(term_t +t, char **s, unsigned flags)

Convert the argument term t to a 0-terminated C-string. flags is a bitwise disjunction from two groups of constants. The first specifies which term types should be converted and the second how the argument is stored. Below is a specification of these constants. BUF_RING implies, if the data is not static (as from an atom), that the data is copied to the next buffer from a ring of 16 buffers. This is a convenient way of converting multiple arguments passed to a foreign predicate to C-strings. If BUF_MALLOC is used, the data must be freed using PL_free() when no longer needed.

With the introduction of wide characters (see section 2.19.1), not all atoms can be converted into a char*. This function fails if t is of the wrong type, but also if the text cannot be represented. See the REP_* flags below for details.

CVT_ATOM

Convert if term is an atom.

CVT_STRING

Convert if term is a string.

CVT_LIST

Convert if term is a list of of character codes.

CVT_INTEGER

Convert if term is an integer.

CVT_FLOAT

Convert if term is a float. The characters returned are the same as write/1 would write for the floating point number.

CVT_NUMBER

Convert if term is an integer or float.

CVT_ATOMIC

Convert if term is atomic.

CVT_VARIABLE

Convert variable to print-name

CVT_WRITE

Convert any term that is not converted by any of the other flags using write/1. If no BUF_* is provided, BUF_RING is implied.

CVT_WRITE_CANONICAL

As CVT_WRITE, but using write_canonical/2.

CVT_WRITEQ

As CVT_WRITE, but using writeq/2.

CVT_ALL

Convert if term is any of the above, except for CVT_VARIABLE and CVT_WRITE*.

CVT_EXCEPTION

If conversion fails due to a type error, raise a Prolog type error exception in addition to failure

BUF_DISCARDABLE

Data must copied immediately

BUF_RING

Data is stored in a ring of buffers

BUF_MALLOC

Data is copied to a new buffer returned by PL_malloc(3). When no longer needed the user must call PL_free() on the data.

REP_ISO_LATIN_1

Text is in ISO Latin-1 encoding and the call fails if text cannot be represented. This flag has the value 0 and is thus the default.

REP_UTF8

Convert the text to a UTF-8 string. This works for all text.

REP_MB

Convert to default locale-defined 8-bit string. Success depends on the locale. Conversion is done using the wcrtomb() C library function.

int PL_get_list_chars(+term_t l, char **s, unsigned flags)

Same as PL_get_chars(l, s, CVT_LIST|flags), provided flags contains none of the CVT_* flags.

int PL_get_integer(+term_t t, int *i)

If t is a Prolog integer, assign its value over i. On 32-bit machines, this is the same as PL_get_long(), but avoids a warning from the compiler. See also PL_get_long().

int PL_get_long(term_t +t, long *i)

If t is a Prolog integer that can be represented as a long, assign its value over i. If t is an integer that cannot be represented by a C long, this function returns FALSE. If t is a floating point number that can be represented as a long, this function succeeds as well. See also PL_get_int64().

int PL_get_int64(term_t +t, int64_t *i)

If t is a Prolog integer or float that can be represented as a int64_t, assign its value over i.

int PL_get_intptr(term_t +t, intptr_t *i)

Get an integer that is at least as wide as a pointer. On most platforms this is the same as PL_get_long(), but on Win64 pointers are 8 bytes and longs only 4. Unlike PL_get_pointer(), the value is not modified.

int PL_get_bool(term_t +t, int *val)

If t has the value true or false, set val to the C constant TRUE or FALSE and return success, otherwise return failure.

int PL_get_pointer(term_t +t, void **ptr)

In the current system, pointers are represented by Prolog integers, but need some manipulation to make sure they do not get truncated due to the limited Prolog integer range. PL_put_pointer() and PL_get_pointer() guarantee pointers in the range of malloc() are handled without truncating.

int PL_get_float(term_t +t, double *f)

If t is a float or integer, its value is assigned over f.

int PL_get_functor(term_t +t, functor_t *f)

If t is compound or an atom, the Prolog representation of the name-arity pair will be assigned over f. See also PL_get_name_arity() and PL_is_functor().

int PL_get_name_arity(term_t +t, atom_t *name, size_t *arity)

If t is compound or an atom, the functor name will be assigned over name and the arity over arity. See also PL_get_functor() and PL_is_functor(). See section 11.3.2.1.

int PL_get_compound_name_arity(term_t +t, atom_t *name, size_t *arity)

If t is compound term, the functor name will be assigned over name and the arity over arity. This is the same as PL_get_name_arity(), but this function fails if t is an atom.

int PL_get_module(term_t +t, module_t *module)

If t is an atom, the system will look up or create the corresponding module and assign an opaque pointer to it over module.

int PL_get_arg(size_t index, term_t +t, term_t -a)

If t is compound and index is between 1 and arity (inclusive), assign a with a term reference to the argument.

int _PL_get_arg(size_t index, term_t +t, term_t -a)

Same as PL_get_arg(), but no checking is performed, neither whether t is actually a term nor whether index is a valid argument index.

11.4.3.3 Exchanging text using length and string

All internal text representation in SWI-Prolog is represented using char * plus length and allow for 0-bytes in them. The foreign library supports this by implementing a *_nchars() function for each applicable *_chars() function. Below we briefly present the signatures of these functions. For full documentation consult the *_chars() function.

int PL_get_atom_nchars(term_t t, size_t *len, char **s)

See PL_get_atom_chars().

int PL_get_list_nchars(term_t t, size_t *len, char **s)

See PL_get_list_chars().

int PL_get_nchars(term_t t, size_t *len, char **s, unsigned int flags)

See PL_get_chars().

int PL_put_atom_nchars(term_t t, size_t len, const char *s)

See PL_put_atom_chars().

int PL_put_string_nchars(term_t t, size_t len, const char *s)

See PL_put_string_chars().

int PL_put_list_ncodes(term_t t, size_t len, const char *s)

See PL_put_list_codes().

int PL_put_list_nchars(term_t t, size_t len, const char *s)

See PL_put_list_chars().

int PL_unify_atom_nchars(term_t t, size_t len, const char *s)

See PL_unify_atom_chars().

int PL_unify_string_nchars(term_t t, size_t len, const char *s)

See PL_unify_string_chars().

int PL_unify_list_ncodes(term_t t, size_t len, const char *s)

See PL_unify_codes().

int PL_unify_list_nchars(term_t t, size_t len, const char *s)

See PL_unify_list_chars().

In addition, the following functions are available for creating and inspecting atoms:

atom_t PL_new_atom_nchars(size_t len, const char *s)

Create a new atom as PL_new_atom(), but using the given length and characters. If len is (size_t)-1, it is computed from s using strlen().

const char * PL_atom_nchars(atom_t a, size_t *len)

Extract the text and length of an atom.

11.4.3.4 Wide-character versions

Support for exchange of wide-character strings is still under consideration. The functions dealing with 8-bit character strings return failure when operating on a wide-character atom or Prolog string object. The functions below can extract and unify both 8-bit and wide atoms and string objects. Wide character strings are represented as C arrays of objects of the type pl_wchar_t, which is guaranteed to be the same as wchar_t on platforms supporting this type. For example, on MS-Windows, this represents 16-bit UCS2 characters, while using the GNU C library (glibc) this represents 32-bit UCS4 characters.

atom_t PL_new_atom_wchars(size_t len, const pl_wchar_t *s)

Create atom from wide-character string as PL_new_atom_nchars() does for ISO-Latin-1 strings. If s only contains ISO-Latin-1 characters a normal byte-array atom is created. If len is (size_t)-1, it is computed from s using wcslen().

pl_wchar_t* PL_atom_wchars(atom_t atom, int *len)

Extract characters from a wide-character atom. Succeeds on any atom marked as `text'. If the underlying atom is a wide-character atom, the returned pointer is a pointer into the atom structure. If it is an ISO-Latin-1 character, the returned pointer comes from Prolog's `buffer ring' (see PL_get_chars()).

int PL_get_wchars(term_t t, size_t *len, pl_wchar_t **s, unsigned flags)

Wide-character version of PL_get_chars(). The flags argument is the same as for PL_get_chars().

int PL_unify_wchars(term_t t, int type, size_t len, const pl_wchar_t *s)

Unify t with a textual representation of the C wide-character array s. The type argument defines the Prolog representation and is one of PL_ATOM, PL_STRING, PL_CODE_LIST or PL_CHAR_LIST.

int PL_unify_wchars_diff(term_t +t, term_t -tail, int type, size_t len, const pl_wchar_t *s)

Difference list version of PL_unify_wchars(), only supporting the types PL_CODE_LIST and PL_CHAR_LIST. It serves two purposes. It allows for returning very long lists from data read from a stream without the need for a resizing buffer in C. Also, the use of difference lists is often practical for further processing in Prolog. Examples can be found in packages/clib/readutil.c from the source distribution.

11.4.3.5 Reading a list

The functions from this section are intended to read a Prolog list from C. Suppose we expect a list of atoms; the following code will print the atoms, each on a line:

foreign_t
pl_write_atoms(term_t l)
{ term_t head = PL_new_term_ref();   /* the elements */
  term_t list = PL_copy_term_ref(l); /* copy (we modify list) */

  while( PL_get_list(list, head, list) )
  { char *s;

    if ( PL_get_atom_chars(head, &s) )
      Sprintf("%s\n", s);
    else
      PL_fail;
  }

  return PL_get_nil(list);            /* test end for [] */
}

Note that as of version 7, lists have a new representation unless the option --traditional is used. see section 5.1.

int PL_get_list(term_t +l, term_t -h, term_t -t)

If l is a list and not the empty list, assign a term reference to the head to h and to the tail to t.

int PL_get_head(term_t +l, term_t -h)

If l is a list and not the empty list, assign a term reference to the head to h.

int PL_get_tail(term_t +l, term_t -t)

If l is a list and not the empty list, assign a term reference to the tail to t.

int PL_get_nil(term_t +l)

Succeeds if l represents the list termination constant.

int PL_skip_list(term_t +list, term_t -tail, size_t *len)

This is a multi-purpose function to deal with lists. It allows for finding the length of a list, checking whether something is a list, etc. The reference tail is set to point to the end of the list, len is filled with the number of list-cells skipped, and the return value indicates the status of the list:

PL_LIST

The list is a `proper' list: one that ends in the list terminator constant and tail is filled with the terminator constant.

PL_PARTIAL_LIST

The list is a `partial' list: one that ends in a variable and tail is a reference to this variable.

PL_CYCLIC_TERM

The list is cyclic (e.g. X = [a|X]). tail points to an arbitrary cell of the list and len is at most twice the cycle length of the list.

PL_NOT_A_LIST

The term list is not a list at all. tail is bound to the non-list term and len is set to the number of list-cells skipped.

It is allowed to pass 0 for tail and NULL for len.

11.4.3.6 An example: defining write/1 in C

Figure 7 shows a simplified definition of write/1 to illustrate the described functions. This simplified version does not deal with operators. It is called display/1, because it mimics closely the behaviour of this Edinburgh predicate.

foreign_t
pl_display(term_t t)
{ functor_t functor;
  int arity, len, n;
  char *s;

  switch( PL_term_type(t) )
  { case PL_VARIABLE:
    case PL_ATOM:
    case PL_INTEGER:
    case PL_FLOAT:
      PL_get_chars(t, &s, CVT_ALL);
      Sprintf("%s", s);
      break;
    case PL_STRING:
      PL_get_string_chars(t, &s, &len);
      Sprintf("\"%s\"", s);
      break;
    case PL_TERM:
    { term_t a = PL_new_term_ref();

      PL_get_name_arity(t, &name, &arity);
      Sprintf("%s(", PL_atom_chars(name));
      for(n=1; n<=arity; n++)
      { PL_get_arg(n, t, a);
        if ( n > 1 )
          Sprintf(", ");
        pl_display(a);
      }
      Sprintf(")");
      break;
    default:
      PL_fail;                          /* should not happen */
    }
  }

  PL_succeed;
}

11.4.4 Constructing Terms

Terms can be constructed using functions from the PL_put_*() and PL_cons_*() families. This approach builds the term `inside-out', starting at the leaves and subsequently creating compound terms. Alternatively, terms may be created `top-down', first creating a compound holding only variables and subsequently unifying the arguments. This section discusses functions for the first approach. This approach is generally used for creating arguments for PL_call() and PL_open_query().

void PL_put_variable(term_t -t)

Put a fresh variable in the term, resetting the term reference to its initial state.^{171Older versions created a variable on the global stack.}

void PL_put_atom(term_t -t, atom_t a)

Put an atom in the term reference from a handle. See also PL_new_atom() and PL_atom_chars().

void PL_put_bool(term_t -t, int val)

Put one of the atoms true or false in the term reference See also PL_put_atom(), PL_unify_bool() and PL_get_bool().

int PL_put_chars(term_t -t, int flags, size_t len, const char *chars)

New function to deal with setting a term from a char* with various encodings. The flags argument is a bitwise or specifying the Prolog target type and the encoding of chars. A Prolog type is one of PL_ATOM, PL_STRING, PL_CODE_LIST or PL_CHAR_LIST. A representation is one of REP_ISO_LATIN_1, REP_UTF8 or REP_MB. See PL_get_chars() for a definition of the representation types. If len is -1 chars must be zero-terminated and the length is computed from chars using strlen().

int PL_put_atom_chars(term_t -t, const char *chars)

Put an atom in the term reference constructed from the zero-terminated string. The string itself will never be referenced by Prolog after this function.

int PL_put_string_chars(term_t -t, const char *chars)

Put a zero-terminated string in the term reference. The data will be copied. See also PL_put_string_nchars().

int PL_put_string_nchars(term_t -t, size_t len, const char *chars)

Put a string, represented by a length/start pointer pair in the term reference. The data will be copied. This interface can deal with 0-bytes in the string. See also section 11.4.20.

int PL_put_list_chars(term_t -t, const char *chars)

Put a list of ASCII values in the term reference.

int PL_put_integer(term_t -t, long i)

Put a Prolog integer in the term reference.

int PL_put_int64(term_t -t, int64_t i)

Put a Prolog integer in the term reference.

int PL_put_pointer(term_t -t, void *ptr)

Put a Prolog integer in the term reference. Provided ptr is in the `malloc()-area', PL_get_pointer() will get the pointer back.

int PL_put_float(term_t -t, double f)

Put a floating-point value in the term reference.

int PL_put_functor(term_t -t, functor_t functor)

Create a new compound term from functor and bind t to this term. All arguments of the term will be variables. To create a term with instantiated arguments, either instantiate the arguments using the PL_unify_*() functions or use PL_cons_functor().

int PL_put_list(term_t -l)

As PL_put_functor(), using the list-cell functor. Note that on classical Prolog systems or in SWI-Prolog using the option --traditional, this is ./2, while on SWI-Prolog version 7 this is [|]/2.

int PL_put_nil(term_t -l)

Put the list terminator constant in l. Always returns TRUE. Note that in classical Prolog systems or in SWI-Prolog using the option --traditional, this is the same as PL_put_atom_chars("[]"). See section 5.1.

void PL_put_term(term_t -t1, term_t +t2)

Make t1 point to the same term as t2.

int PL_cons_functor(term_t -h, functor_t f, ...)

Create a term whose arguments are filled from a variable argument list holding the same number of term_t objects as the arity of the functor. To create the term animal(gnu, 50), use:

{ term_t a1 = PL_new_term_ref();
  term_t a2 = PL_new_term_ref();
  term_t t  = PL_new_term_ref();
  functor_t animal2;

  /* animal2 is a constant that may be bound to a global
     variable and re-used
  */
  animal2 = PL_new_functor(PL_new_atom("animal"), 2);

  PL_put_atom_chars(a1, "gnu");
  PL_put_integer(a2, 50);
  PL_cons_functor(t, animal2, a1, a2);
}

After this sequence, the term references a1 and a2 may be used for other purposes.

int PL_cons_functor_v(term_t -h, functor_t f, term_t a0)

Create a compound term like PL_cons_functor(), but a0 is an array of term references as returned by PL_new_term_refs(). The length of this array should match the number of arguments required by the functor.

int PL_cons_list(term_t -l, term_t +h, term_t +t)

Create a list (cons-) cell in l from the head h and tail t. The code below creates a list of atoms from a char **. The list is built tail-to-head. The PL_unify_*() functions can be used to build a list head-to-tail.

void
put_list(term_t l, int n, char **words)
{ term_t a = PL_new_term_ref();

  PL_put_nil(l);
  while( --n >= 0 )
  { PL_put_atom_chars(a, words[n]);
    PL_cons_list(l, a, l);
  }
}

Note that l can be redefined within a PL_cons_list call as shown here because operationally its old value is consumed before its new value is set.

11.4.5 Unifying data

The functions of this section unify terms with other terms or translated C data structures. Except for PL_unify(), these functions are specific to SWI-Prolog. They have been introduced because they shorten the code for returning data to Prolog and at the same time make this more efficient by avoiding the need to allocate temporary term references and reduce the number of calls to the Prolog API. Consider the case where we want a foreign function to return the host name of the machine Prolog is running on. Using the PL_get_*() and PL_put_*() functions, the code becomes:

foreign_t
pl_hostname(term_t name)
{ char buf[100];

  if ( gethostname(buf, sizeof(buf)) )
  { term_t tmp = PL_new_term_ref();

    PL_put_atom_chars(tmp, buf);
    return PL_unify(name, tmp);
  }

  PL_fail;
}

Using PL_unify_atom_chars(), this becomes:

foreign_t
pl_hostname(term_t name)
{ char buf[100];

  if ( gethostname(buf, sizeof(buf)) )
    return PL_unify_atom_chars(name, buf);

  PL_fail;
}

Note that unification functions that perform multiple bindings may leave part of the bindings in case of failure. See PL_unify() for details.

int PL_unify(term_t ?t1, term_t ?t2)

Unify two Prolog terms and return TRUE on success.

Care is needed if PL_unify() returns FAIL and the foreign function does not immediately return to Prolog with FAIL. Unification may perform multiple changes to either t1 or t2. A failing unification may have created bindings before failure is detected. Already created bindings are not undone. For example, calling PL_unify() on a(X, a) and a(c,b) binds X to c and fails when trying to unify a to b. If control remains in C or even if we want to return success to Prolog, we must undo such bindings. This is achieved using PL_open_foreign_frame() and PL_rewind_foreign_frame(), as shown in the snippet below.

    { fid_t fid = PL_open_foreign_frame();

      ...
      if ( !PL_unify(t1, t2) )
        PL_rewind_foreign_frame(fid);
      ...

      PL_close_foreign_frame(fid);
    }

In addition, PL_unify() may have failed on an exception, typically a resource (stack) overflow. This can be tested using PL_exception(), passing 0 (zero) for the query-id argument. Foreign functions that encounter an exception must return FAIL to Prolog as soon as possible or call PL_clear_exception() if they wish to ignore the exception.

int PL_unify_atom(term_t ?t, atom_t a)

Unify t with the atom a and return non-zero on success.

int PL_unify_bool(term_t ?t, int a)

Unify t with either true or false.

int PL_unify_chars(term_t ?t, int flags, size_t len, const char *chars)

New function to deal with unification of char* with various encodings to a Prolog representation. The flags argument is a bitwise or specifying the Prolog target type and the encoding of chars. A Prolog type is one of PL_ATOM, PL_STRING, PL_CODE_LIST or PL_CHAR_LIST. A representation is one of REP_ISO_LATIN_1, REP_UTF8 or REP_MB. See PL_get_chars() for a definition of the representation types. If len is -1 chars must be zero-terminated and the length is computed from chars using strlen().

If flags includes PL_DIFF_LIST and type is one of PL_CODE_LIST or PL_CHAR_LIST, the text is converted to a difference list. The tail of the difference list is t+1.

int PL_unify_atom_chars(term_t ?t, const char *chars)

Unify t with an atom created from chars and return non-zero on success.

int PL_unify_list_chars(term_t ?t, const char *chars)

Unify t with a list of ASCII characters constructed from chars.

void PL_unify_string_chars(term_t ?t, const char *chars)

Unify t with a Prolog string object created from the zero-terminated string chars. The data will be copied. See also PL_unify_string_nchars().

int PL_unify_integer(term_t ?t, intptr_t n)

Unify t with a Prolog integer from n.

int PL_unify_int64(term_t ?t, int64_t n)

Unify t with a Prolog integer from n.

int PL_unify_uint64(term_t ?t, uint64_t n)

Unify t with a Prolog integer from n. Note that unbounded integer support is required if n does not fit in a signed int64_t. If unbounded integers are not supported a representation_error is raised.

int PL_unify_float(term_t ?t, double f)

Unify t with a Prolog float from f.

int PL_unify_pointer(term_t ?t, void *ptr)

Unify t with a Prolog integer describing the pointer. See also PL_put_pointer() and PL_get_pointer().

int PL_unify_functor(term_t ?t, functor_t f)

If t is a compound term with the given functor, just succeed. If it is unbound, create a term and bind the variable, else fail. Note that this function does not create a term if the argument is already instantiated. If f is a functor with arity 0, t is unified with an atom. See also PL_unify_compound().

int PL_unify_compound(term_t ?t, functor_t f)

If t is a compound term with the given functor, just succeed. If it is unbound, create a term and bind the variable, else fail. Note that this function does not create a term if the argument is already instantiated. If f is a functor with arity 0, t is unified with compound without arguments. See also PL_unify_functor().

int PL_unify_list(term_t ?l, term_t -h, term_t -t)

Unify l with a list-cell (./2). If successful, write a reference to the head of the list into h and a reference to the tail of the list into t. This reference may be used for subsequent calls to this function. Suppose we want to return a list of atoms from a char **. We could use the example described by PL_put_list(), followed by a call to PL_unify(), or we can use the code below. If the predicate argument is unbound, the difference is minimal (the code based on PL_put_list() is probably slightly faster). If the argument is bound, the code below may fail before reaching the end of the word list, but even if the unification succeeds, this code avoids a duplicate (garbage) list and a deep unification.

foreign_t
pl_get_environ(term_t env)
{ term_t l = PL_copy_term_ref(env);
  term_t a = PL_new_term_ref();
  extern char **environ;
  char **e;

  for(e = environ; *e; e++)
  { if ( !PL_unify_list(l, a, l) ||
         !PL_unify_atom_chars(a, *e) )
      PL_fail;
  }

  return PL_unify_nil(l);
}

int PL_unify_nil(term_t ?l)

Unify l with the atom [].

int PL_unify_arg(int index, term_t ?t, term_t ?a)

Unifies the index-th argument (1-based) of t with a.

int PL_unify_term(term_t ?t, ...)

Unify t with a (normally) compound term. The remaining arguments are a sequence of a type identifier followed by the required arguments. This predicate is an extension to the Quintus and SICStus foreign interface from which the SWI-Prolog foreign interface has been derived, but has proved to be a powerful and comfortable way to create compound terms from C. Due to the vararg packing/unpacking and the required type-switching this interface is slightly slower than using the primitives. Please note that some bad C compilers have fairly low limits on the number of arguments that may be passed to a function.

Special attention is required when passing numbers. C `promotes' any integral smaller than int to int. That is, the types char, short and int are all passed as int. In addition, on most 32-bit platforms int and long are the same. Up to version 4.0.5, only PL_INTEGER could be specified, which was taken from the stack as long. Such code fails when passing small integral types on machines where int is smaller than long. It is advised to use PL_SHORT, PL_INT or PL_LONG as appropriate. Similarly, C compilers promote float to double and therefore PL_FLOAT and PL_DOUBLE are synonyms.

The type identifiers are:

PL_VARIABLE none

No op. Used in arguments of PL_FUNCTOR.

PL_BOOL int

Unify the argument with true or false.

PL_ATOM atom_t

Unify the argument with an atom, as in PL_unify_atom().

PL_CHARS const char *

Unify the argument with an atom constructed from the C char *, as in PL_unify_atom_chars().

PL_NCHARS size_t, const char *

Unify the argument with an atom constructed from length and char* as in PL_unify_atom_nchars().

PL_UTF8_CHARS const char *

Create an atom from a UTF-8 string.

PL_UTF8_STRING const char *

Create a packed string object from a UTF-8 string.

PL_MBCHARS const char *

Create an atom from a multi-byte string in the current locale.

PL_MBCODES const char *

Create a list of character codes from a multi-byte string in the current locale.

PL_MBSTRING const char *

Create a packed string object from a multi-byte string in the current locale.

PL_NWCHARS size_t, const wchar_t *

Create an atom from a length and a wide character pointer.

PL_NWCODES size_t, const wchar_t *

Create a list of character codes from a length and a wide character pointer.

PL_NWSTRING size_t, const wchar_t *

Create a packed string object from a length and a wide character pointer.

PL_SHORT short

Unify the argument with an integer, as in PL_unify_integer(). As short is promoted to int, PL_SHORT is a synonym for PL_INT.

PL_INTEGER long

Unify the argument with an integer, as in PL_unify_integer().

PL_INT int

Unify the argument with an integer, as in PL_unify_integer().

PL_LONG long

Unify the argument with an integer, as in PL_unify_integer().

PL_INT64 int64_t

Unify the argument with a 64-bit integer, as in PL_unify_int64().

PL_INTPTR intptr_t

Unify the argument with an integer with the same width as a pointer. On most machines this is the same as PL_LONG. but on 64-bit MS-Windows pointers are 64 bits while longs are only 32 bits.

PL_DOUBLE double

Unify the argument with a float, as in PL_unify_float(). Note that, as the argument is passed using the C vararg conventions, a float must be casted to a double explicitly.

PL_FLOAT double

Unify the argument with a float, as in PL_unify_float().

PL_POINTER void *

Unify the argument with a pointer, as in PL_unify_pointer().

PL_STRING const char *

Unify the argument with a string object, as in PL_unify_string_chars().

PL_TERM term_t

Unify a subterm. Note this may be the return value of a PL_new_term_ref() call to get access to a variable.

PL_FUNCTOR functor_t, ...

Unify the argument with a compound term. This specification should be followed by exactly as many specifications as the number of arguments of the compound term.

PL_FUNCTOR_CHARS const char *name, int arity, ...

Create a functor from the given name and arity and then behave as PL_FUNCTOR.

PL_LIST int length, ...

Create a list of the indicated length. The remaining arguments contain the elements of the list.

For example, to unify an argument with the term language(dutch), the following skeleton may be used:

static functor_t FUNCTOR_language1;

static void
init_constants()
{ FUNCTOR_language1 = PL_new_functor(PL_new_atom("language"),1);
}

foreign_t
pl_get_lang(term_t r)
{ return PL_unify_term(r,
                       PL_FUNCTOR, FUNCTOR_language1,
                           PL_CHARS, "dutch");
}

install_t
install()
{ PL_register_foreign("get_lang", 1, pl_get_lang, 0);
  init_constants();
}

int PL_chars_to_term(const char *chars, term_t -t)

Parse the string chars and put the resulting Prolog term into t. chars may or may not be closed using a Prolog full-stop (i.e., a dot followed by a blank). Returns FALSE if a syntax error was encountered and TRUE after successful completion. In addition to returning FALSE, the exception-term is returned in t on a syntax error. See also term_to_atom/2.

The following example builds a goal term from a string and calls it.

int
call_chars(const char *goal)
{ fid_t fid = PL_open_foreign_frame();
  term_t g = PL_new_term_ref();
  BOOL rval;

  if ( PL_chars_to_term(goal, g) )
    rval = PL_call(goal, NULL);
  else
    rval = FALSE;

  PL_discard_foreign_frame(fid);
  return rval;
}
  ...
  call_chars("consult(load)");
  ...

int PL_wchars_to_term(const pl_wchar_t *chars, term_t -t)

Wide character version of PL_chars_to_term().

char * PL_quote(int chr, const char *string)

Return a quoted version of string. If chr is '\'', the result is a quoted atom. If chr is '"', the result is a string. The result string is stored in the same ring of buffers as described with the BUF_RING argument of PL_get_chars();

In the current implementation, the string is surrounded by chr and any occurrence of chr is doubled. In the future the behaviour will depend on the character_escapes Prolog flag.

11.4.6 Convenient functions to generate Prolog exceptions

The typical implementation of a foreign predicate first uses the PL_get_*() functions to extract C data types from the Prolog terms. Failure of any of these functions is normally because the Prolog term is of the wrong type. The *_ex() family of functions are wrappers around (mostly) the PL_get_*() functions, such that we can write code in the style below and get proper exceptions if an argument is uninstantiated or of the wrong type.

/** set_size(+Name:atom, +Width:int, +Height:int) is det.

static foreign_t
set_size(term_t name, term_t width, term_t height)
{ char *n;
  int w, h;

  if ( !PL_get_chars(name, &n, CVT_ATOM|CVT_EXCEPTION) ||
       !PL_get_integer_ex(with, &w) ||
       !PL_get_integer_ex(height, &h) )
    return FALSE;

  ...

}

int PL_get_atom_ex(term_t t, atom_t *a)

As PL_get_atom(), but raises a type or instantiation error if t is not an atom.

int PL_get_integer_ex(term_t t, int *i)

As PL_get_integer(), but raises a type or instantiation error if t is not an integer, or a representation error if the Prolog integer does not fit in a C int.

int PL_get_long_ex(term_t t, long *i)

As PL_get_long(), but raises a type or instantiation error if t is not an atom, or a representation error if the Prolog integer does not fit in a C long.

int PL_get_int64_ex(term_t t, int64_t *i)

As PL_get_int64(), but raises a type or instantiation error if t is not an atom, or a representation error if the Prolog integer does not fit in a C int64_t.

int PL_get_intptr_ex(term_t t, intptr_t *i)

As PL_get_intptr(), but raises a type or instantiation error if t is not an atom, or a representation error if the Prolog integer does not fit in a C intptr_t.

int PL_get_size_ex(term_t t, size_t *i)

As PL_get_size(), but raises a type or instantiation error if t is not an atom, or a representation error if the Prolog integer does not fit in a C size_t.

int PL_get_bool_ex(term_t t, int *i)

As PL_get_bool(), but raises a type or instantiation error if t is not an boolean.

int PL_get_float_ex(term_t t, double *f)

As PL_get_float(), but raises a type or instantiation error if t is not a float.

int PL_get_char_ex(term_t t, int *p, int eof)

Get a character code from t, where t is either an integer or an atom with length one. If eof is TRUE and t is -1, p is filled with -1. Raises an appropriate error if the conversion is not possible.

int PL_get_pointer_ex(term_t t, void **addrp)

As PL_get_pointer(), but raises a type or instantiation error if t is not a pointer.

int PL_get_list_ex(term_t l, term_t h, term_t t)

As PL_get_list(), but raises a type or instantiation error if t is not a list.

int PL_get_nil_ex(term_t l)

As PL_get_nil(), but raises a type or instantiation error if t is not the empty list.

int PL_unify_list_ex(term_t l, term_t h, term_t t)

As PL_unify_list(), but raises a type error if t is not a variable, list-cell or the empty list.

int PL_unify_nil_ex(term_t l)

As PL_unify_nil(), but raises a type error if t is not a variable, list-cell or the empty list.

int PL_unify_bool_ex(term_t t, int val)

As PL_unify_bool(), but raises a type error if t is not a variable or a boolean.

The second family of functions in this section simplifies the generation of ISO compatible error terms. Any foreign function that calls this function must return to Prolog with the return code of the error function or the constant FALSE. If available, these error functions add the name of the calling predicate to the error context. See also PL_raise_exception().

int PL_instantiation_error(term_t culprit)

Raise instantiation_error. Culprit is ignored, but should be bound to the term that is insufficiently instantiated. See instantiation_error/1.

int PL_uninstantiation_error(term_t culprit)

Raise uninstantiation_error(culprit). This should be called if an argument that must be unbound at entry is bound to culprit. This error is typically raised for a pure output arguments such as a newly created stream handle (e.g., the third argument of open/3).

int PL_representation_error(const char *resource)

Raise representation_error(resource). See representation_error/1.

int PL_type_error(const char *expected, term_t culprit)

Raise type_error(expected, culprit). See type_error/2.

int PL_domain_error(const char *expected, term_t culprit)

Raise domain_error(expected, culprit). See domain_error/2.

int PL_existence_error(const char *type, term_t culprit)

Raise existence_error(type, culprit). See type_error/2.

int PL_permission_error(const char *operation, const char *type, term_t culprit)

Raise permission_error(operation, type, culprit). See permission_error/3.

int PL_resource_error(const char *resource)

Raise resource_error(resource). See resource_error/1.

int PL_syntax_error(const char *message, IOSTREAM *in)

Raise syntax_error(message). If arg is not NULL, add information about the current position of the input stream.

11.4.7 BLOBS: Using atoms to store arbitrary binary data

SWI-Prolog atoms as well as strings can represent arbitrary binary data of arbitrary length. This facility is attractive for storing foreign data such as images in an atom. An atom is a unique handle to this data and the atom garbage collector is able to destroy atoms that are no longer referenced by the Prolog engine. This property of atoms makes them attractive as a handle to foreign resources, such as Java atoms, Microsoft's COM objects, etc., providing safe combined garbage collection.

To exploit these features safely and in an organised manner, the SWI-Prolog foreign interface allows for creating `atoms' with additional type information. The type is represented by a structure holding C function pointers that tell Prolog how to handle releasing the atom, writing it, sorting it, etc. Two atoms created with different types can represent the same sequence of bytes. Atoms are first ordered on the rank number of the type and then on the result of the compare() function. Rank numbers are assigned when the type is registered.

11.4.7.1 Defining a BLOB type

The type PL_blob_t represents a structure with the layout displayed below. The structure contains additional fields at the ... for internal bookkeeping as well as future extensions.

typedef struct PL_blob_t
{ uintptr_t     magic;          /* PL_BLOB_MAGIC */
  uintptr_t     flags;          /* Bitwise or of PL_BLOB_* */
  char *        name;           /* name of the type */
  int           (*release)(atom_t a);
  int           (*compare)(atom_t a, atom_t b);
  int           (*write)(IOSTREAM *s, atom_t a, int flags);
  void          (*acquire)(atom_t a);
  ...
} PL_blob_t;

For each type, exactly one such structure should be allocated. Its first field must be initialised to PL_BLOB_MAGIC. The flags is a bitwise or of the following constants:

PL_BLOB_TEXT

If specified the blob is assumed to contain text and is considered a normal Prolog atom.

PL_BLOB_UNIQUE

If specified the system ensures that the blob-handle is a unique reference for a blob with the given type, length and content. If this flag is not specified, each lookup creates a new blob.

PL_BLOB_NOCOPY

By default the content of the blob is copied. Using this flag the blob references the external data directly. The user must ensure the provided pointer is valid as long as the atom lives. If PL_BLOB_UNIQUE is also specified, uniqueness is determined by comparing the pointer rather than the data pointed at.

The name field represents the type name as available to Prolog. See also current_blob/2. The other fields are function pointers that must be initialised to proper functions or NULL to get the default behaviour of built-in atoms. Below are the defined member functions:

void acquire(atom_t a)

Called if a new blob of this type is created through PL_put_blob() or PL_unify_blob(). This callback may be used together with the release hook to deal with reference-counted external objects.

int release(atom_t a)

The blob (atom) a is about to be released. This function can retrieve the data of the blob using PL_blob_data(). If it returns FALSE the atom garbage collector will not reclaim the atom.

int compare(atom_t a, atom_t b)

Compare the blobs a and b, both of which are of the type associated to this blob type. Return values are, as memcmp(), < 0 if a is less than b, = 0 if both are equal, and > 0 otherwise.

int write(IOSTREAM *s, atom_t a, int flags)

Write the content of the blob a to the stream s respecting the flags. The flags are a bitwise or of zero or more of the PL_WRT_* flags defined in SWI-Prolog.h. This prototype is available if the undocumented SWI-Stream.h is included before SWI-Prolog.h.

If this function is not provided, write/1 emits the content of the blob for blobs of type PL_BLOB_TEXT or a string of the format <#hex data> for binary blobs.

If a blob type is registered from a loadable object (shared object or DLL) the blob type must be deregistered before the object may be released.

int PL_unregister_blob_type(PL_blob_t *type)

Unlink the blob type from the registered type and transform the type of possible living blobs to unregistered, avoiding further reference to the type structure, functions referred by it, as well as the data. This function returns TRUE if no blobs of this type existed and FALSE otherwise. PL_unregister_blob_type() is intended for the uninstall() hook of foreign modules, avoiding further references to the module.

11.4.7.2 Accessing blobs

The blob access functions are similar to the atom accessing functions. Blobs being atoms, the atom functions operate on blobs and vice versa. For clarity and possible future compatibility issues, however, it is not advised to rely on this.

int PL_is_blob(term_t t, PL_blob_t **type)

Succeeds if t refers to a blob, in which case type is filled with the type of the blob.

int PL_unify_blob(term_t t, void *blob, size_t len, PL_blob_t *type)

Unify t to a new blob constructed from the given data and associated to the given type. See also PL_unify_atom_nchars().

int PL_put_blob(term_t t, void *blob, size_t len, PL_blob_t *type)

Store the described blob in t. The return value indicates whether a new blob was allocated (FALSE) or the blob is a reference to an existing blob (TRUE). Reporting new/existing can be used to deal with external objects having their own reference counts. If the return is TRUE this reference count must be incremented, and it must be decremented on blob destruction callback. See also PL_put_atom_nchars().

int PL_get_blob(term_t t, void **blob, size_t *len, PL_blob_t **type)

If t holds a blob or atom, get the data and type and return TRUE. Otherwise return FALSE. Each result pointer may be NULL, in which case the requested information is ignored.

void * PL_blob_data(atom_t a, size_t *len, PL_blob_t **type)

Get the data and type associated to a blob. This function is mainly used from the callback functions described in section 11.4.7.1.

11.4.8 Exchanging GMP numbers

If SWI-Prolog is linked with the GNU Multiple Precision Arithmetic Library (GMP, used by default), the foreign interface provides functions for exchanging numeric values to GMP types. To access these functions the header <gmp.h> must be included before <SWI-Prolog.h>. Foreign code using GMP linked to SWI-Prolog asks for some considerations.

• SWI-Prolog normally rebinds the GMP allocation functions using mp_set_memory_functions(). This means SWI-Prolog must be initialised before the foreign code touches any GMP function. You can call \cfuncref{PL_action}{PL_GMP_SET_ALLOC_FUNCTIONS, TRUE} to force Prolog's GMP initialization without doing the rest of the Prolog initialization. If you do not want Prolog rebinding the GMP allocation, call \cfuncref{PL_action}{PL_GMP_SET_ALLOC_FUNCTIONS, FALSE} before initializing Prolog.

• On Windows, each DLL has its own memory pool. To make exchange of GMP numbers between Prolog and foreign code possible you must either let Prolog rebind the allocation functions (default) or you must recompile SWI-Prolog to link to a DLL version of the GMP library.

Here is an example exploiting the function mpz_nextprime():

#include <gmp.h>
#include <SWI-Prolog.h>

static foreign_t
next_prime(term_t n, term_t prime)
{ mpz_t mpz;
  int rc;

  mpz_init(mpz);
  if ( PL_get_mpz(n, mpz) )
  { mpz_nextprime(mpz, mpz);

    rc = PL_unify_mpz(prime, mpz);
  } else
    rc = FALSE;

  mpz_clear(mpz);
  return rc;
}

install_t
install()
{ PL_register_foreign("next_prime", 2, next_prime, 0);
}

int PL_get_mpz(term_t t, mpz_t mpz)

If t represents an integer, mpz is filled with the value and the function returns TRUE. Otherwise mpz is untouched and the function returns FALSE. Note that mpz must have been initialised before calling this function and must be cleared using mpz_clear() to reclaim any storage associated with it.

int PL_get_mpq(term_t t, mpq_t mpq)

If t is an integer or rational number (term rdiv/2), mpq is filled with the normalised rational number and the function returns TRUE. Otherwise mpq is untouched and the function returns FALSE. Note that mpq must have been initialised before calling this function and must be cleared using mpq_clear() to reclaim any storage associated with it.

int PL_unify_mpz(term_t t, mpz_t mpz)

Unify t with the integer value represented by mpz and return TRUE on success. The mpz argument is not changed.

int PL_unify_mpq(term_t t, mpq_t mpq)

Unify t with a rational number represented by mpq and return TRUE on success. Note that t is unified with an integer if the denominator is 1. The mpq argument is not changed.

11.4.9 Calling Prolog from C

The Prolog engine can be called from C. There are two interfaces for this. For the first, a term is created that could be used as an argument to call/1, and then PL_call() is used to call Prolog. This system is simple, but does not allow to inspect the different answers to a non-deterministic goal and is relatively slow as the runtime system needs to find the predicate. The other interface is based on PL_open_query(), PL_next_solution() and PL_cut_query() or PL_close_query(). This mechanism is more powerful, but also more complicated to use.

11.4.9.1 Predicate references

This section discusses the functions used to communicate about predicates. Though a Prolog predicate may be defined or not, redefined, etc., a Prolog predicate has a handle that is neither destroyed nor moved. This handle is known by the type predicate_t.

predicate_t PL_pred(functor_t f, module_t m)

Return a handle to a predicate for the specified name/arity in the given module. This function always succeeds, creating a handle for an undefined predicate if no handle was available. If the module argument m is NULL, the current context module is used.

predicate_t PL_predicate(const char *name, int arity, const char* module)

Same as PL_pred(), but provides a more convenient interface to the C programmer.

void PL_predicate_info(predicate_t p, atom_t *n, size_t *a, module_t *m)

Return information on the predicate p. The name is stored over n, the arity over a, while m receives the definition module. Note that the latter need not be the same as specified with PL_predicate(). If the predicate is imported into the module given to PL_predicate(), this function will return the module where the predicate is defined. Any of the arguments n, a and m can be NULL.

11.4.9.2 Initiating a query from C

This section discusses the functions for creating and manipulating queries from C. Note that a foreign context can have at most one active query. This implies that it is allowed to make strictly nested calls between C and Prolog (Prolog calls C, calls Prolog, calls C, etc.), but it is not allowed to open multiple queries and start generating solutions for each of them by calling PL_next_solution(). Be sure to call PL_cut_query() or PL_close_query() on any query you opened before opening the next or returning control back to Prolog.

qid_t PL_open_query(module_t ctx, int flags, predicate_t p, term_t +t0)

Opens a query and returns an identifier for it. ctx is the context module of the goal. When NULL, the context module of the calling context will be used, or user if there is no calling context (as may happen in embedded systems). Note that the context module only matters for meta-predicates. See meta_predicate/1, context_module/1 and module_transparent/1. The p argument specifies the predicate, and should be the result of a call to PL_pred() or PL_predicate(). Note that it is allowed to store this handle as global data and reuse it for future queries. The term reference t0 is the first of a vector of term references as returned by PL_new_term_refs(n).

The flags arguments provides some additional options concerning debugging and exception handling. It is a bitwise or of the following values:

PL_Q_NORMAL

Normal operation. The debugger inherits its settings from the environment. If an exception occurs that is not handled in Prolog, a message is printed and the tracer is started to debug the error.^{172Do not pass the integer 0 for normal operation, as this is interpreted as PL_Q_NODEBUG for backward compatibility reasons.}

PL_Q_NODEBUG

Switch off the debugger while executing the goal. This option is used by many calls to hook-predicates to avoid tracing the hooks. An example is print/1 calling portray/1 from foreign code.

PL_Q_CATCH_EXCEPTION

If an exception is raised while executing the goal, do not report it, but make it available for PL_exception().

PL_Q_PASS_EXCEPTION

As PL_Q_CATCH_EXCEPTION, but do not invalidate the exception-term while calling PL_close_query(). This option is experimental.

PL_Q_ALLOW_YIELD

Support the I_YIELD instruction for engine-based coroutining. See in boot/init.pl for details.

PL_Q_EXT_STATUS

Make PL_next_solution() return extended status. Instead of only TRUE or FALSE extended status as illustrated in the following table:

Extended	Normal
PL_S_EXCEPTION	FALSE	Exception available through PL_exception()
PL_S_FALSE	FALSE	Query failed
PL_S_TRUE	TRUE	Query succeeded with choicepoint
PL_S_LAST	TRUE	Query succeeded without choicepoint

PL_open_query() can return the query identifier `0' if there is not enough space on the environment stack. This function succeeds, even if the referenced predicate is not defined. In this case, running the query using PL_next_solution() will return an existence_error. See PL_exception().

The example below opens a query to the predicate is_a/2 to find the ancestor of `me'. The reference to the predicate is valid for the duration of the process and may be cached by the client.

char *
ancestor(const char *me)
{ term_t a0 = PL_new_term_refs(2);
  static predicate_t p;

  if ( !p )
    p = PL_predicate("is_a", 2, "database");

  PL_put_atom_chars(a0, me);
  PL_open_query(NULL, PL_Q_NORMAL, p, a0);
  ...
}

int PL_next_solution(qid_t qid)

Generate the first (next) solution for the given query. The return value is TRUE if a solution was found, or FALSE to indicate the query could not be proven. This function may be called repeatedly until it fails to generate all solutions to the query.

void PL_cut_query(qid_t qid)

Discards the query, but does not delete any of the data created by the query. It just invalidates qid, allowing for a new call to PL_open_query() in this context.

void PL_close_query(qid_t qid)

As PL_cut_query(), but all data and bindings created by the query are destroyed.

qid_t PL_current_query(void)

Returns the query id of of the current query or 0 if the current thread is not executing any queries.

int PL_call_predicate(module_t m, int flags, predicate_t pred, term_t +t0)

Shorthand for PL_open_query(), PL_next_solution(), PL_cut_query(), generating a single solution. The arguments are the same as for PL_open_query(), the return value is the same as PL_next_solution().

int PL_call(term_t t, module_t m)

Call term t just like the Prolog predicate once/1. t is called in the module m, or in the context module if m == NULL. Returns TRUE if the call succeeds, FALSE otherwise. Figure 8 shows an example to obtain the number of defined atoms. All checks are omitted to improve readability.

11.4.10 Discarding Data

The Prolog data created and term references needed to set up the call and/or analyse the result can in most cases be discarded right after the call. PL_close_query() allows for destroying the data, while leaving the term references. The calls below may be used to destroy term references and data. See figure 8 for an example.

fid_t PL_open_foreign_frame()

Create a foreign frame, holding a mark that allows the system to undo bindings and destroy data created after it, as well as providing the environment for creating term references. This function is called by the kernel before calling a foreign predicate.

void PL_close_foreign_frame(fid_t id)

Discard all term references created after the frame was opened. All other Prolog data is retained. This function is called by the kernel whenever a foreign function returns control back to Prolog.

void PL_discard_foreign_frame(fid_t id)

Same as PL_close_foreign_frame(), but also undo all bindings made since the open and destroy all Prolog data.

void PL_rewind_foreign_frame(fid_t id)

Undo all bindings and discard all term references created since the frame was created, but do not pop the frame. That is, the same frame can be rewound multiple times, and must eventually be closed or discarded.

It is obligatory to call either of the two closing functions to discard a foreign frame. Foreign frames may be nested.

int
count_atoms()
{ fid_t fid = PL_open_foreign_frame();
  term_t goal  = PL_new_term_ref();
  term_t a1    = PL_new_term_ref();
  term_t a2    = PL_new_term_ref();
  functor_t s2 = PL_new_functor(PL_new_atom("statistics"), 2);
  int atoms;

  PL_put_atom_chars(a1, "atoms");
  PL_cons_functor(goal, s2, a1, a2);
  PL_call(goal, NULL);         /* call it in current module */

  PL_get_integer(a2, &atoms);
  PL_discard_foreign_frame(fid);

  return atoms;
}

11.4.11 Foreign Code and Modules

Modules are identified via a unique handle. The following functions are available to query and manipulate modules.

module_t PL_context()

Return the module identifier of the context module of the currently active foreign predicate.

int PL_strip_module(term_t +raw, module_t *m, term_t -plain)

Utility function. If raw is a term, possibly holding the module construct <module>:<rest>, this function will make plain a reference to <rest> and fill module * with <module>. For further nested module constructs the innermost module is returned via module *. If raw is not a module construct, raw will simply be put in plain. The value pointed to by m must be initialized before calling PL_strip_module(), either to the default module or to NULL. A NULL value is replaced by the current context module if raw carries no module. The following example shows how to obtain the plain term and module if the default module is the user module:

{ module m = PL_new_module(PL_new_atom("user"));
  term_t plain = PL_new_term_ref();

  PL_strip_module(term, &m, plain);
  ...
}

atom_t PL_module_name(module_t module)

Return the name of module as an atom.

module_t PL_new_module(atom_t name)

Find an existing module or create a new module with the name name.

11.4.12 Prolog exceptions in foreign code

This section discusses PL_exception(), PL_throw() and PL_raise_exception(), the interface functions to detect and generate Prolog exceptions from C code. PL_throw() and PL_raise_exception() from the C interface raise an exception from foreign code. PL_throw() exploits the C function longjmp() to return immediately to the innermost PL_next_solution(). PL_raise_exception() registers the exception term and returns FALSE. If a foreign predicate returns FALSE, while an exception term is registered, a Prolog exception will be raised by the virtual machine.

Calling these functions outside the context of a function implementing a foreign predicate results in undefined behaviour.

PL_exception() may be used after a call to PL_next_solution() fails, and returns a term reference to an exception term if an exception was raised, and 0 otherwise.

If a C function implementing a predicate calls Prolog and detects an exception using PL_exception(), it can handle this exception or return with the exception. Some caution is required though. It is not allowed to call PL_close_query() or PL_discard_foreign_frame() afterwards, as this will invalidate the exception term. Below is the code that calls a Prolog-defined arithmetic function (see arithmetic_function/1).

If PL_next_solution() succeeds, the result is analysed and translated to a number, after which the query is closed and all Prolog data created after PL_open_foreign_frame() is destroyed. On the other hand, if PL_next_solution() fails and if an exception was raised, just pass it. Otherwise generate an exception (PL_error() is an internal call for building the standard error terms and calling PL_raise_exception()). After this, the Prolog environment should be discarded using PL_cut_query() and PL_close_foreign_frame() to avoid invalidating the exception term.

static int
prologFunction(ArithFunction f, term_t av, Number r)
{ int arity = f->proc->definition->functor->arity;
  fid_t fid = PL_open_foreign_frame();
  qid_t qid;
  int rval;

  qid = PL_open_query(NULL, PL_Q_NORMAL, f->proc, av);

  if ( PL_next_solution(qid) )
  { rval = valueExpression(av+arity-1, r);
    PL_close_query(qid);
    PL_discard_foreign_frame(fid);
  } else
  { term_t except;

    if ( (except = PL_exception(qid)) )
    { rval = PL_throw(except);          /* pass exception */
    } else
    { char *name = stringAtom(f->proc->definition->functor->name);

                                        /* generate exception */
      rval = PL_error(name, arity-1, NULL, ERR_FAILED, f->proc);
    }

    PL_cut_query(qid);                  /* donot destroy data */
    PL_close_foreign_frame(fid);        /* same */
  }

  return rval;
}

int PL_raise_exception(term_t exception)

Generate an exception (as throw/1) and return FALSE. Below is an example returning an exception from a foreign predicate:

foreign_t
pl_hello(term_t to)
{ char *s;

  if ( PL_get_atom_chars(to, &s) )
  { Sprintf("Hello \"%s\"\n", s);

    PL_succeed;
  } else
  { term_t except = PL_new_term_ref();

    PL_unify_term(except,
                  PL_FUNCTOR_CHARS, "type_error", 2,
                    PL_CHARS, "atom",
                    PL_TERM, to);

    return PL_raise_exception(except);
  }
}

int PL_throw(term_t exception)

Similar to PL_raise_exception(), but returns using the C longjmp() function to the innermost PL_next_solution().

term_t PL_exception(qid_t qid)

If PL_next_solution() fails, this can be due to normal failure of the Prolog call, or because an exception was raised using throw/1. This function returns a handle to the exception term if an exception was raised, or 0 if the Prolog goal simply failed. If there is an exception, PL_exception() allocates a term-handle using PL_new_term_ref() that is used to return the exception term.

Additionally, \cfuncref{PL_exception}{0} returns the pending exception in the current query or 0 if no exception is pending. This can be used to check the error status after a failing call to, e.g., one of the unification functions.

void PL_clear_exception(void)

Tells Prolog that the encountered exception must be ignored. This function must be called if control remains in C after a previous API call fails with an exception.^{173This feature is non-portable. Other Prolog systems (e.g., YAP) have no facilities to ignore raised exceptions, and the design of YAP's exception handling does not support such a facility.}

11.4.13 Catching Signals (Software Interrupts)

SWI-Prolog offers both a C and Prolog interface to deal with software interrupts (signals). The Prolog mapping is defined in section 4.12. This subsection deals with handling signals from C.

If a signal is not used by Prolog and the handler does not call Prolog in any way, the native signal interface routines may be used.

Any handler that wishes to call one of the Prolog interface functions should call PL_sigaction() to install the handler. PL_signal() provides a deprecated interface that is notably not capable of properly restoring the old signal status if the signal was previously handled by Prolog.

int PL_sigaction(int sig, pl_sigaction_t *act, pl_sigaction_t *oldact)

Install or query the status for signal sig. The signal is an integer between 1 and 64, where the where the signals up to 32 are mapped to OS signals and signals above that are handled by Prolog's synchronous signal handling. The pl_sigaction_t is a struct with the following definition:

typedef struct pl_sigaction
{ void        (*sa_cfunction)(int);     /* traditional C function */
  predicate_t sa_predicate;             /* call a predicate */
  int         sa_flags;                 /* additional flags */
} pl_sigaction_t;

The sa_flags is a bitwise or of PLSIG_THROW, PLSIG_SYNC and PLSIG_NOFRAME. Signal handling is enabled if PLSIG_THROW is provided, sa_cfunction or sa_predicate is provided. sa_predicate is a predicate handle for a predicate with arity 1. If no action is provided the signal handling for this signal is restored to the default before PL_initialise() was called.

Finally, 0 (zero) may be passsed for sig. In that case the system allocates a free signal in the Prolog range (32 ... 64). Such signal handler are activated using PL_thread_raise().

void (*)() PL_signal(sig, func)

This function is equivalent to the BSD-Unix signal() function, regardless of the platform used. The signal handler is blocked while the signal routine is active, and automatically reactivated after the handler returns.

After a signal handler is registered using this function, the native signal interface redirects the signal to a generic signal handler inside SWI-Prolog. This generic handler validates the environment, creates a suitable environment for calling the interface functions described in this chapter and finally calls the registered user-handler.

By default, signals are handled asynchronously (i.e., at the time they arrive). It is inherently dangerous to call extensive code fragments, and especially exception related code from asynchronous handlers. The interface allows for synchronous handling of signals. In this case the native OS handler just schedules the signal using PL_raise(), which is checked by PL_handle_signals() at the call- and redo-port. This behaviour is realised by or-ing sig with the constant PL_SIGSYNC.^{174A better default would be to use synchronous handling, but this interface preserves backward compatibility.}

Signal handling routines may raise exceptions using PL_raise_exception(). The use of PL_throw() is not safe. If a synchronous handler raises an exception, the exception is delayed to the next call to PL_handle_signals();

int PL_raise(int sig)

Register sig for synchronous handling by Prolog. Synchronous signals are handled at the call-port or if foreign code calls PL_handle_signals(). See also thread_signal/2.

int PL_handle_signals(void)

Handle any signals pending from PL_raise(). PL_handle_signals() is called at each pass through the call- and redo-port at a safe point. Exceptions raised by the handler using PL_raise_exception() are properly passed to the environment.

The user may call this function inside long-running foreign functions to handle scheduled interrupts. This routine returns the number of signals handled. If a handler raises an exception, the return value is -1 and the calling routine should return with FALSE as soon as possible.

int PL_get_signum_ex(term_t t, int *sig)

Extract a signal specification from a Prolog term and store as an integer signal number in sig. The specification is an integer, a lowercase signal name without SIG or the full signal name. These refer to the same: 9, kill and SIGKILL. Leaves a typed, domain or instantiation error if the conversion fails.

11.4.14 Miscellaneous

11.4.14.1 Term Comparison

int PL_compare(term_t t1, term_t t2)

Compares two terms using the standard order of terms and returns -1, 0 or 1. See also compare/3.

int PL_same_compound(term_t t1, term_t t2)

Yields TRUE if t1 and t2 refer to physically the same compound term and FALSE otherwise.

11.4.14.2 Recorded database

In some applications it is useful to store and retrieve Prolog terms from C code. For example, the XPCE graphical environment does this for storing arbitrary Prolog data as slot-data of XPCE objects.

Please note that the returned handles have no meaning at the Prolog level and the recorded terms are not visible from Prolog. The functions PL_recorded() and PL_erase() are the only functions that can operate on the stored term.

Two groups of functions are provided. The first group (PL_record() and friends) store Prolog terms on the Prolog heap for retrieval during the same session. These functions are also used by recorda/3 and friends. The recorded database may be used to communicate Prolog terms between threads.

record_t PL_record(term_t +t)

Record the term t into the Prolog database as recorda/3 and return an opaque handle to the term. The returned handle remains valid until PL_erase() is called on it. PL_recorded() is used to copy recorded terms back to the Prolog stack.

record_t PL_duplicate_record(record_t record)

Return a duplicate of record. As records are read-only objects this function merely increments the records reference count.

int PL_recorded(record_t record, term_t -t)

Copy a recorded term back to the Prolog stack. The same record may be used to copy multiple instances at any time to the Prolog stack. Returns TRUE on success, and FALSE if there is not enough space on the stack to accommodate the term. See also PL_record() and PL_erase().

void PL_erase(record_t record)

Remove the recorded term from the Prolog database, reclaiming all associated memory resources.

The second group (headed by PL_record_external()) provides the same functionality, but the returned data has properties that enable storing the data on an external device. It has been designed to make it possible to store Prolog terms fast and compact in an external database. Here are the main features:

• Independent of session
  Records can be communicated to another Prolog session and made visible using PL_recorded_external().
• Binary
  The representation is binary for maximum performance. The returned data may contain zero bytes.
• Byte-order independent
  The representation can be transferred between machines with different byte order.
• No alignment restrictions
  There are no memory alignment restrictions and copies of the record can thus be moved freely. For example, it is possible to use this representation to exchange terms using shared memory between different Prolog processes.
• Compact
  It is assumed that a smaller memory footprint will eventually outperform slightly faster representations.
• Stable
  The format is designed for future enhancements without breaking compatibility with older records.

char * PL_record_external(term_t +t, size_t *len)

Record the term t into the Prolog database as recorda/3 and return an opaque handle to the term. The returned handle remains valid until PL_erase_external() is called on it.

It is allowed to copy the data and use PL_recorded_external() on the copy. The user is responsible for the memory management of the copy. After copying, the original may be discarded using PL_erase_external().

PL_recorded_external() is used to copy such recorded terms back to the Prolog stack.

int PL_recorded_external(const char *record, term_t -t)

Copy a recorded term back to the Prolog stack. The same record may be used to copy multiple instances at any time to the Prolog stack. See also PL_record_external() and PL_erase_external().

int PL_erase_external(char *record)

Remove the recorded term from the Prolog database, reclaiming all associated memory resources.

11.4.14.3 Getting file names

The function PL_get_file_name() provides access to Prolog filenames and its file-search mechanism described with absolute_file_name/3. Its existence is motivated to realise a uniform interface to deal with file properties, search, naming conventions, etc., from foreign code.

int PL_get_file_name(term_t spec, char **name, int flags)

Translate a Prolog term into a file name. The name is stored in the static buffer ring described with th PL_get_chars() option BUF_RING. Conversion from the internal UNICODE encoding is done using standard C library functions. flags is a bit-mask controlling the conversion process. Options are:

PL_FILE_ABSOLUTE

Return an absolute path to the requested file.

PL_FILE_OSPATH

Return the name using the hosting OS conventions. On MS-Windows, \ is used to separate directories rather than the canonical /.

PL_FILE_SEARCH

Invoke absolute_file_name/3. This implies rules from file_search_path/2 are used.

PL_FILE_EXIST

Demand the path to refer to an existing entity.

PL_FILE_READ

Demand read-access on the result.

PL_FILE_WRITE

Demand write-access on the result.

PL_FILE_EXECUTE

Demand execute-access on the result.

PL_FILE_NOERRORS

Do not raise any exceptions.

int PL_get_file_nameW(term_t spec, wchar_t **name, int flags)

Same as PL_get_file_name(), but returns the filename as a wide-character string. This is intended for Windows to access the Unicode version of the Win32 API. Note that the flag PL_FILE_OSPATH must be provided to fetch a filename in OS native (e.g., C:\x\y) notation.

11.4.14.4 Dealing with Prolog flags from C

Foreign code can set or create Prolog flags using PL_set_prolog_flag(). See set_prolog_flag/2 and create_prolog_flag/3.^{175The current C API does not provide for a dedicated mechanism for fetching the value of Prolog flags. Relatively slow access is provided by calling PL_call_predicate() using current_prolog_flag/2.}

int PL_set_prolog_flag(const char *name, int type, ...)

Set/create a Prolog flag from C. name is the name of the affected flag. type is one of the values below, which also dictates the type of the final argument. The function returns TRUE on success and FALSE on failure. This function can be called before PL_initialise(), making the flag available to the Prolog startup code.

PL_BOOL

Create a boolean (true or false) flag. The argument must be an int.

PL_ATOM

Create a flag with an atom as value. The argument must be of type const char *.

PL_INTEGER

Create a flag with an integer as value. The argument must be of type intptr_t *.

11.4.15 Errors and warnings

PL_warning() prints a standard Prolog warning message to the standard error (user_error) stream. Please note that new code should consider using PL_raise_exception() to raise a Prolog exception. See also section 4.11.

int PL_warning(format, a1, ...)

Print an error message starting with `[WARNING: ', followed by the output from format, followed by a `]' and a newline. Then start the tracer. format and the arguments are the same as for printf(2). Always returns FALSE.

11.4.16 Environment Control from Foreign Code

int PL_action(int, ...)

Perform some action on the Prolog system. int describes the action. Remaining arguments depend on the requested action. The actions are listed below:

PL_ACTION_TRACE

Start Prolog tracer (trace/0). Requires no arguments.

PL_ACTION_DEBUG

Switch on Prolog debug mode (debug/0). Requires no arguments.

PL_ACTION_BACKTRACE

Print backtrace on current output stream. The argument (an int) is the number of frames printed.

PL_ACTION_HALT

Halt Prolog execution. This action should be called rather than Unix exit() to give Prolog the opportunity to clean up. This call does not return. The argument (an int) is the exit code. See halt/1.

PL_ACTION_ABORT

Generate a Prolog abort (abort/0). This call does not return. Requires no arguments.

PL_ACTION_BREAK

Create a standard Prolog break environment (break/0). Returns after the user types the end-of-file character. Requires no arguments.

PL_ACTION_GUIAPP

Windows: Used to indicate to the kernel that the application is a GUI application if the argument is not 0, and a console application if the argument is 0. If a fatal error occurs, the system uses a windows messagebox to report this on a GUI application, and otherwise simply prints the error and exits.

PL_ACTION_TRADITIONAL

Same effect as using --traditional. Must be called before PL_initialise().

PL_ACTION_WRITE

Write the argument, a char * to the current output stream.

PL_ACTION_FLUSH

Flush the current output stream. Requires no arguments.

PL_ACTION_ATTACH_CONSOLE

Attach a console to a thread if it does not have one. See attach_console/0.

PL_GMP_SET_ALLOC_FUNCTIONS

Takes an integer argument. If TRUE, the GMP allocations are immediately bound to the Prolog functions. If FALSE, SWI-Prolog will never rebind the GMP allocation functions. See mp_set_memory_functions() in the GMP documentation. The action returns FALSE if there is no GMP support or GMP is already initialised.

11.4.17 Querying Prolog

long PL_query(int)

Obtain status information on the Prolog system. The actual argument type depends on the information required. int describes what information is wanted.^{176Returning pointers and integers as a long is bad style. The signature of this function should be changed.} The options are given in table 9.

PL_QUERY_ARGC	Return an integer holding the number of arguments given to Prolog from Unix.
PL_QUERY_ARGV	Return a char ** holding the argument vector given to Prolog from Unix.
PL_QUERY_SYMBOLFILE	Return a char * holding the current symbol file of the running process.
PL_MAX_INTEGER	Return a long, representing the maximal integer value represented by a Prolog integer.
PL_MIN_INTEGER	Return a long, representing the minimal integer value.
PL_QUERY_VERSION	Return a long, representing the version as 10,000 × M + 100 × m + p, where M is the major, m the minor version number and p the patch level. For example, 20717 means 2.7.17.
PL_QUERY_ENCODING	Return the default stream encoding of Prolog (of type IOENC).
PL_QUERY_USER_CPU	Get amount of user CPU time of the process in milliseconds.

Table 9 : PL_query() options

11.4.18 Registering Foreign Predicates

int PL_register_foreign_in_module(char *mod, char *name, int arity, foreign_t (*f)(), int flags, ...)

Register the C function f to implement a Prolog predicate. After this call returns successfully a predicate with name name (a char *) and arity arity (a C int) is created in module mod. If mod is NULL, the predicate is created in the module of the calling context, or if no context is present in the module user.

When called in Prolog, Prolog will call function. flags form a bitwise or'ed list of options for the installation. These are:

PL_FA_META	Provide meta-predicate info (see below)
PL_FA_TRANSPARENT	Predicate is module transparent (deprecated)
PL_FA_NONDETERMINISTIC	Predicate is non-deterministic. See also PL_retry().
PL_FA_NOTRACE	Predicate cannot be seen in the tracer
PL_FA_VARARGS	Use alternative calling convention.

If PL_FA_META is provided, PL_register_foreign_in_module() takes one extra argument. This argument is of type const char*. This string must be exactly as long as the number of arguments of the predicate and filled with characters from the set 0-9:^-+?. See meta_predicate/1 for details. PL_FA_TRANSPARENT is implied if at least one meta-argument is provided (0-9:^). Note that meta-arguments are not always passed as <module>:<term>. Always use PL_strip_module() to extract the module and plain term from a meta-argument.^{177It is encouraged to pass an additional NULL pointer for non-meta-predicates.}

Predicates may be registered either before or after PL_initialise(). When registered before initialisation the registration is recorded and executed after installing the system predicates and before loading the saved state.

Default calling (i.e. without PL_FA_VARARGS) function is passed the same number of term_t arguments as the arity of the predicate and, if the predicate is non-deterministic, an extra argument of type control_t (see section 11.4.1.1). If PL_FA_VARARGS is provided, function is called with three arguments. The first argument is a term_t handle to the first argument. Further arguments can be reached by adding the offset (see also PL_new_term_refs()). The second argument is the arity, which defines the number of valid term references in the argument vector. The last argument is used for non-deterministic calls. It is currently undocumented and should be defined of type void*. Here is an example:

static foreign_t
atom_checksum(term_t a0, int arity, void* context)
{ char *s;

  if ( PL_get_atom_chars(a0, &s) )
  { int sum;

    for(sum=0; *s; s++)
      sum += *s&0xff;

    return PL_unify_integer(a0+1, sum&0xff);
  }

  return FALSE;
}

install_t
install()
{ PL_register_foreign("atom_checksum", 2,
                      atom_checksum, PL_FA_VARARGS);
}

int PL_register_foreign(const char *name, int arity, foreign_t (*function)(), int flags, ...)

Same as PL_register_foreign_in_module(), passing NULL for the module.

void PL_register_extensions_in_module(const char *module, PL_extension *e)

Register a series of predicates from an array of definitions of the type PL_extension in the given module. If module is NULL, the predicate is created in the module of the calling context, or if no context is present in the module user. The PL_extension type is defined as

typedef struct PL_extension
{ char          *predicate_name; /* Name of the predicate */
  short         arity;           /* Arity of the predicate */
  pl_function_t function;        /* Implementing functions */
  short         flags;           /* Or of PL_FA_... */
} PL_extension;

For details, see PL_register_foreign_in_module(). Here is an example of its usage:

static PL_extension predicates[] = {
{ "foo",        1,      pl_foo, 0 },
{ "bar",        2,      pl_bar, PL_FA_NONDETERMINISTIC },
{ NULL,         0,      NULL,   0 }
};

main(int argc, char **argv)
{ PL_register_extensions_in_module("user", predicates);

  if ( !PL_initialise(argc, argv) )
    PL_halt(1);

  ...
}

void PL_register_extensions( PL_extension *e)

Same as PL_register_extensions_in_module() using NULL for the module argument.

11.4.19 Foreign Code Hooks

For various specific applications some hooks are provided.

PL_dispatch_hook_t PL_dispatch_hook(PL_dispatch_hook_t)

If this hook is not NULL, this function is called when reading from the terminal. It is supposed to dispatch events when SWI-Prolog is connected to a window environment. It can return two values: PL_DISPATCH_INPUT indicates Prolog input is available on file descriptor 0 or PL_DISPATCH_TIMEOUT to indicate a timeout. The old hook is returned. The type PL_dispatch_hook_t is defined as:

typedef int  (*PL_dispatch_hook_t)(void);

void PL_abort_hook(PL_abort_hook_t)

Install a hook when abort/0 is executed. SWI-Prolog abort/0 is implemented using C setjmp()/longjmp() construct. The hooks are executed in the reverse order of their registration after the longjmp() took place and before the Prolog top level is reinvoked. The type PL_abort_hook_t is defined as:

typedef void (*PL_abort_hook_t)(void);

int PL_abort_unhook(PL_abort_hook_t)

Remove a hook installed with PL_abort_hook(). Returns FALSE if no such hook is found, TRUE otherwise.

void PL_on_halt(int (*f)(int, void *), void *closure)

Register the function f to be called if SWI-Prolog is halted. The function is called with two arguments: the exit code of the process (0 if this cannot be determined) and the closure argument passed to the PL_on_halt() call. Handlers must return 0. Other return values are reserved for future use. See also at_halt/1.^{bugAlthough both PL_on_halt() and at_halt/1 are called in FIFO order, all at_halt/1 handlers are called before all PL_on_halt() handlers.} These handlers are called before system cleanup and can therefore access all normal Prolog resources. See also PL_exit_hook().

void PL_exit_hook(int (*f)(int, void *), void *closure)

Similar to PL_on_halt(), but the hooks are executed by PL_halt() instead of PL_cleanup() just before calling exit().

PL_agc_hook_t PL_agc_hook(PL_agc_hook_t new)

Register a hook with the atom-garbage collector (see garbage_collect_atoms/0) that is called on any atom that is reclaimed. The old hook is returned. If no hook is currently defined, NULL is returned. The argument of the called hook is the atom that is to be garbage collected. The return value is an int. If the return value is zero, the atom is not reclaimed. The hook may invoke any Prolog predicate.

The example below defines a foreign library for printing the garbage collected atoms for debugging purposes.

#include <SWI-Stream.h>
#include <SWI-Prolog.h>

static int
atom_hook(atom_t a)
{ Sdprintf("AGC: deleting %s\n", PL_atom_chars(a));

  return TRUE;
}

static PL_agc_hook_t old;

install_t
install()
{ old = PL_agc_hook(atom_hook);
}

install_t
uninstall()
{ PL_agc_hook(old);
}

11.4.20 Storing foreign data

When combining foreign code with Prolog, it can be necessary to make data represented in the foreign language available to Prolog. For example, to pass it to another foreign function. At the end of this section, there is a partial implementation of using foreign functions to manage bit-vectors. Another example is the SGML/XML library that manages a `parser' object, an object that represents the current state of the parser and that can be directed to perform actions such as parsing a document or make queries about the document content.

This section provides some hints for handling foreign data in Prolog. There are four options for storing such data:

• Natural Prolog data
  Uses the representation one would choose if no foreign interface was required. For example, a bitvector representing a list of small integers can be represented as a Prolog list of integers.

• Opaque packed data on the stacks
  It is possible to represent the raw binary representation of the foreign object as a Prolog string (see section 5.2). Strings may be created from foreign data using PL_put_string_nchars() and retrieved using PL_get_string_chars(). It is good practice to wrap the string in a compound term with arity 1, so Prolog can identify the type. The hook portray/1 rules may be used to streamline printing such terms during development.

• Opaque packed data in a blob
  Similar to the above solution, binary data can be stored in an atom. The blob interface (section 11.4.7) provides additional facilities to assign a type and hook-functions that act on creation and destruction of the underlying atom.

• Natural foreign data, passed as a pointer
  An alternative is to pass a pointer to the foreign data. Again, the pointer is often wrapped in a compound term.

The choice may be guided using the following distinctions

• Is the data opaque to Prolog
  With `opaque' data, we refer to data handled in foreign functions, passed around in Prolog, but where Prolog never examines the contents of the data itself. If the data is opaque to Prolog, the selection will be driven solely by simplicity of the interface and performance.

• What is the lifetime of the data
  With `lifetime' we refer to how it is decided that the object is (or can be) destroyed. We can distinguish three cases:
  1. The object must be destroyed on backtracking and normal Prolog garbage collection (i.e., it acts as a normal Prolog term). In this case, representing the object as a Prolog string (second option above) is the only feasible solution.

  2. The data must survive Prolog backtracking. This leaves two options. One is to represent the object using a pointer and use explicit creation and destruction, making the programmer responsible. The alternative is to use the blob-interface, leaving destruction to the (atom) garbage collector.

  3. The data lives as during the lifetime of a foreign function that implements a predicate. If the predicate is deterministic, foreign automatic variables are suitable. If the predicate is non-deterministic, the data may be allocated using malloc() and a pointer may be passed. See section 11.4.1.1.

11.4.20.1 Examples for storing foreign data

In this section, we outline some examples, covering typical cases. In the first example, we will deal with extending Prolog's data representation with integer sets, represented as bit-vectors. Then, we discuss the outline of the DDE interface.

Integer sets with not-too-far-apart upper- and lower-bounds can be represented using bit-vectors. Common set operations, such as union, intersection, etc., are reduced to simple and'ing and or'ing the bit-vectors. This can be done using Prolog's unbounded integers.

For really demanding applications, foreign representation will perform better, especially time-wise. Bit-vectors are naturally expressed using string objects. If the string is wrapped in bitvector/1, the lower-bound of the vector is 0 and the upper-bound is not defined; an implementation for getting and putting the sets as well as the union predicate for it is below.

#include <SWI-Prolog.h>

#define max(a, b) ((a) > (b) ? (a) : (b))
#define min(a, b) ((a) < (b) ? (a) : (b))

static functor_t FUNCTOR_bitvector1;

static int
get_bitvector(term_t in, int *len, unsigned char **data)
{ if ( PL_is_functor(in, FUNCTOR_bitvector1) )
  { term_t a = PL_new_term_ref();

    PL_get_arg(1, in, a);
    return PL_get_string(a, (char **)data, len);
  }

  PL_fail;
}

static int
unify_bitvector(term_t out, int len, const unsigned char *data)
{ if ( PL_unify_functor(out, FUNCTOR_bitvector1) )
  { term_t a = PL_new_term_ref();

    PL_get_arg(1, out, a);

    return PL_unify_string_nchars(a, len, (const char *)data);
  }

  PL_fail;
}

static foreign_t
pl_bitvector_union(term_t t1, term_t t2, term_t u)
{ unsigned char *s1, *s2;
  int l1, l2;

  if ( get_bitvector(t1, &l1, &s1) &&
       get_bitvector(t2, &l2, &s2) )
  { int l = max(l1, l2);
    unsigned char *s3 = alloca(l);

    if ( s3 )
    { int n;
      int ml = min(l1, l2);

      for(n=0; n<ml; n++)
        s3[n] = s1[n] | s2[n];
      for( ; n < l1; n++)
        s3[n] = s1[n];
      for( ; n < l2; n++)
        s3[n] = s2[n];

      return unify_bitvector(u, l, s3);
    }

    return PL_warning("Not enough memory");
  }

  PL_fail;
}


install_t
install()
{ PL_register_foreign("bitvector_union", 3, pl_bitvector_union, 0);

  FUNCTOR_bitvector1 = PL_new_functor(PL_new_atom("bitvector"), 1);
}

The DDE interface (see section 4.43) represents another common usage of the foreign interface: providing communication to new operating system features. The DDE interface requires knowledge about active DDE server and client channels. These channels contains various foreign data types. Such an interface is normally achieved using an open/close protocol that creates and destroys a handle. The handle is a reference to a foreign data structure containing the relevant information.

There are a couple of possibilities for representing the handle. The choice depends on responsibilities and debugging facilities. The simplest approach is to use PL_unify_pointer() and PL_get_pointer(). This approach is fast and easy, but has the drawbacks of (untyped) pointers: there is no reliable way to detect the validity of the pointer, nor to verify that it is pointing to a structure of the desired type. The pointer may be wrapped into a compound term with arity 1 (i.e., dde_channel(<Pointer>)), making the type-problem less serious.

Alternatively (used in the DDE interface), the interface code can maintain a (preferably variable length) array of pointers and return the index in this array. This provides better protection. Especially for debugging purposes, wrapping the handle in a compound is a good suggestion.

11.4.21 Embedding SWI-Prolog in other applications

With embedded Prolog we refer to the situation where the `main' program is not the Prolog application. Prolog is sometimes embedded in C, C++, Java or other languages to provide logic based services in a larger application. Embedding loads the Prolog engine as a library to the external language. Prolog itself only provides for embedding in the C language (compatible with C++). Embedding in Java is achieved using JPL using a C-glue between the Java and Prolog C interfaces.

The most simple embedded program is below. The interface function PL_initialise() must be called before any of the other SWI-Prolog foreign language functions described in this chapter, except for PL_initialise_hook(), PL_new_atom(), PL_new_functor() and PL_register_foreign(). PL_initialise() interprets all the command line arguments, except for the -t toplevel flag that is interpreted by PL_toplevel().

int
main(int argc, char **argv)
{ if ( !PL_initialise(argc, argv) )
    PL_halt(1);

  PL_halt(PL_toplevel() ? 0 : 1);
}

int PL_initialise(int argc, char **argv)

Initialises the SWI-Prolog heap and stacks, restores the Prolog state, loads the system and personal initialisation files, runs the initialization/1 hooks and finally runs the -g goal hook.

Special consideration is required for argv[0]. On Unix, this argument passes the part of the command line that is used to locate the executable. Prolog uses this to find the file holding the running executable. The Windows version uses this to find a module of the running executable. If the specified module cannot be found, it tries the module libpl.dll, containing the Prolog runtime kernel. In all these cases, the resulting file is used for two purposes:

• See whether a Prolog saved state is appended to the file. If this is the case, this state will be loaded instead of the default boot.prc file from the SWI-Prolog home directory. See also qsave_program/[1,2] and section 11.5.
• Find the Prolog home directory. This process is described in detail in section 11.6.

PL_initialise() returns 1 if all initialisation succeeded and 0 otherwise.^{bugVarious fatal errors may cause PL_initialise() to call PL_halt(1), preventing it from returning at all.}

In most cases, argc and argv will be passed from the main program. It is allowed to create your own argument vector, provided argv[0] is constructed according to the rules above. For example:

int
main(int argc, char **argv)
{ char *av[10];
  int ac = 0;

  av[ac++] = argv[0];
  av[ac++] = "-x";
  av[ac++] = "mystate";
  av[ac]   = NULL;

  if ( !PL_initialise(ac, av) )
    PL_halt(1);
  ...
}

Please note that the passed argument vector may be referred from Prolog at any time and should therefore be valid as long as the Prolog engine is used.

A good setup in Windows is to add SWI-Prolog's bin directory to your PATH and either pass a module holding a saved state, or "libpl.dll" as argv[0]. If the Prolog state is attached to a DLL (see the -dll option of swipl-ld), pass the name of this DLL.

int PL_is_initialised(int *argc, char ***argv)

Test whether the Prolog engine is already initialised. Returns FALSE if Prolog is not initialised and TRUE otherwise. If the engine is initialised and argc is not NULL, the argument count used with PL_initialise() is stored in argc. Same for the argument vector argv.

int PL_set_resource_db_mem(const unsigned char *data, size_t size)

This function must be called at most once and before calling PL_initialise(). The memory area designated by data and size must contain the resource data and be in the format as produced by qsave_program/2. The memory area is accessed by PL_initialise() as well as calls to open_resource/3.^{178This implies that the data must remain accessible during the lifetime of the process if open_resource/3 is used. Future versions may provide a function to detach the resource database and cause open_resource/3 to raise an exception.}

For example, we can include the bootstrap data into an embedded executable using the steps below. The advantage of this approach is that it is fully supported by any OS and you obtain a single file executable.

1. Create a saved state using qsave_program/2 or

   % swipl -o state -c file.pl ...

2. Create a C source file from the state using e.g., the Unix utility xxd(1):

   % xxd -i state > state.h

3. Embed Prolog as in the example below. Instead of calling the toplevel you probably want to call your application code.

   #include <SWI-Prolog.h>
   #include "state.h"
   
   int
   main(int argc, char **argv)
   { if ( !PL_set_resource_db_mem(state, state_len) ||
          !PL_initialise(argc, argv) )
       PL_halt(1);
   
     return PL_toplevel();
   }

Alternative to xxd, it is possible to use inline assembler, e.g. the gcc incbin instruction. Code for gcc was provided by Roberto Bagnara on the SWI-Prolog mailinglist. Given the state in a file state, create the following assembler program:

        .globl _state
        .globl _state_end
_state:
        .incbin "state"
_state_end:

Now include this as follows:

#include <SWI-Prolog.h>

#if __linux
#define STATE _state
#define STATE_END _state_end
#else
#define STATE state
#define STATE_END state_end
#endif

extern unsigned char STATE[];
extern unsigned char STATE_END[];

int
main(int argc, char **argv)
{ if ( !PL_set_resource_db_mem(STATE, STATE_END - STATE) ||
       !PL_initialise(argc, argv) )
    PL_halt(1);
  return PL_toplevel();
}

As Jose Morales pointed at https://github.com/graphitemaster/incbin, which contains a portability layer on top of the above idea.

int PL_toplevel()

Runs the goal of the -t toplevel switch (default prolog/0) and returns 1 if successful, 0 otherwise.

int PL_cleanup(int status)

This function performs the reverse of PL_initialise(). It runs the PL_on_halt() and at_halt/1 handlers, closes all streams (except for the `standard I/O' streams which are flushed only), deallocates all memory if status equals `0' and restores all signal handlers. The status argument is passed to the various termination hooks and indicates the exit-status.

The function returns TRUE if successful and FALSE otherwise. Currently, FALSE is returned when an attempt is made to call PL_cleanup() recursively or if one of the exit handlers cancels the termination using cancel_halt/1. Exit handlers may only cancel termination if status is 0.

In theory, this function allows deleting and restarting the Prolog system in the same process. In practice, SWI-Prolog's cleanup process is far from complete, and trying to revive the system using PL_initialise() will leak memory in the best case. It can also crash the appliction.

In this state, there is little practical use for this function. If you want to use Prolog temporarily, consider running it in a separate process. If you want to be able to reset Prolog, your options are (again) a separate process, modules or threads.

void PL_cleanup_fork()

Stop intervaltimer that may be running on behalf of profile/1. The call is intended to be used in combination with fork():

    if ( (pid=fork()) == 0 )
    { PL_cleanup_fork();
      <some exec variation>
    }

The call behaves the same on Windows, though there is probably no meaningful application.

int PL_halt(int status)

Clean up the Prolog environment using PL_cleanup() and if successful call exit() with the status argument. Returns FALSE if exit was cancelled by PL_cleanup().

11.4.21.1 Threading, Signals and embedded Prolog

This section applies to Unix-based environments that have signals or multithreading. The Windows version is compiled for multithreading, and Windows lacks proper signals.

We can distinguish two classes of embedded executables. There are small C/C++ programs that act as an interfacing layer around Prolog. Most of these programs can be replaced using the normal Prolog executable extended with a dynamically loaded foreign extension and in most cases this is the preferred route. In other cases, Prolog is embedded in a complex application that---like Prolog---wants to control the process environment. A good example is Java. Embedding Prolog is generally the only way to get these environments together in one process image. Java VMs, however, are by nature multithreaded and appear to do signal handling (software interrupts).

On Unix systems, SWI-Prolog installs handlers for the following signals:

SIGUSR2

has an empty signal handler. This signal is sent to a thread after sending a thread-signal (see thread_signal/2). It causes blocking system calls to return with EINTR, which gives them the opportunity to react to thread-signals.

In some cases the embedded system and SWI-Prolog may both use SIGUSR2 without conflict. If the embedded system redefines SIGUSR2 with a handler that runs quickly and no harm is done in the embedded system due to spurious wakeup when initiated from Prolog, there is no problem. If SWI-Prolog is initialised after the embedded system it will call the handler set by the embedded system and the same conditions as above apply. SWI-Prolog's handler is a simple function only chaining a possibly previously registered handler. SWI-Prolog can handle spurious SIGUSR2 signals.

SIGINT

is used by the top level to activate the tracer (typically bound to control-C). The first control-C posts a request for starting the tracer in a safe, synchronous fashion. If control-C is hit again before the safe route is executed, it prompts the user whether or not a forced interrupt is desired.

SIGTERM, SIGABRT and SIGQUIT

are caught to cleanup before killing the process again using the same signal.

SIGSEGV, SIGILL, SIGBUS, SIGFPE and SIGSYS

are caught by to print a backtrace before killing the process again using the same signal.

SIGHUP

is caught and causes the process to exit with status 2 after cleanup.

The --nosignals option can be used to inhibit all signal processing except for SIGUSR2. The handling of SIGUSR2 is vital for dealing with blocking system call in threads. The used signal may be changed using the --sigalert=NUM option or disabled using --sigalert=0.