1/*  Part of SWI-Prolog
    2
    3    Author:        Jan Wielemaker
    4    E-mail:        J.Wielemaker@vu.nl
    5    WWW:           http://www.swi-prolog.org
    6    Copyright (c)  2000-2016, University of Amsterdam
    7                              VU University Amsterdam
    8    All rights reserved.
    9
   10    Redistribution and use in source and binary forms, with or without
   11    modification, are permitted provided that the following conditions
   12    are met:
   13
   14    1. Redistributions of source code must retain the above copyright
   15       notice, this list of conditions and the following disclaimer.
   16
   17    2. Redistributions in binary form must reproduce the above copyright
   18       notice, this list of conditions and the following disclaimer in
   19       the documentation and/or other materials provided with the
   20       distribution.
   21
   22    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   23    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   24    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
   25    FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
   26    COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
   27    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
   28    BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
   29    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   30    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   31    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
   32    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
   33    POSSIBILITY OF SUCH DAMAGE.
   34*/
   35
   36:- module(socket,
   37          [ tcp_socket/1,               % -Socket
   38            tcp_close_socket/1,         % +Socket
   39            tcp_open_socket/3,          % +Socket, -Read, -Write
   40            tcp_connect/2,              % +Socket, +Address
   41            tcp_connect/3,              % +Socket, +Address, -StreamPair
   42            tcp_connect/4,              % +Socket, +Address, -Read, -Write)
   43            tcp_bind/2,                 % +Socket, +Address
   44            tcp_accept/3,               % +Master, -Slave, -PeerName
   45            tcp_listen/2,               % +Socket, +BackLog
   46            tcp_fcntl/3,                % +Socket, +Command, ?Arg
   47            tcp_setopt/2,               % +Socket, +Option
   48            tcp_host_to_address/2,      % ?HostName, ?Ip-nr
   49            tcp_select/3,               % +Inputs, -Ready, +Timeout
   50            gethostname/1,              % -HostName
   51
   52            tcp_open_socket/2,          % +Socket, -StreamPair
   53
   54            udp_socket/1,               % -Socket
   55            udp_receive/4,              % +Socket, -Data, -Sender, +Options
   56            udp_send/4,                 % +Socket, +Data, +Sender, +Options
   57
   58            negotiate_socks_connection/2% +DesiredEndpoint, +StreamPair
   59          ]).   60:- use_module(library(shlib)).   61:- use_module(library(debug)).   62:- use_module(library(lists)).

dump_swi_homepage :-
    setup_call_cleanup(
        tcp_connect(www.swi-prolog.org:http, Stream, []),
        ( format(Stream,
                 'GET / HTTP/1.1~n\c
                  Host: www.swi-prolog.org~n\c
                  Connection: close~n~n', []),
          flush_output(Stream),
          copy_stream_data(Stream, current_output)
        ),
        close(S)).

create_server(Port) :-
      tcp_socket(Socket),
      tcp_bind(Socket, Port),
      tcp_listen(Socket, 5),
      tcp_open_socket(Socket, AcceptFd, _),
      <dispatch>

dispatch(AcceptFd) :-
        tcp_accept(AcceptFd, Socket, _Peer),
        thread_create(process_client(Socket, Peer), _,
                      [ detached(true)
                      ]),
        dispatch(AcceptFd).

process_client(Socket, Peer) :-
        setup_call_cleanup(
            tcp_open_socket(Socket, StreamPair),
            handle_service(In, StreamPair),
            close(StreamPair)).

handle_service(StreamPair) :-
        ...

  151:- multifile
  152    tcp_connect_hook/3,             % +Socket, +Addr, -In, -Out
  153    tcp_connect_hook/4,             % +Socket, +Addr, -Stream
  154    proxy_for_url/3,                % +URL, +Host, -ProxyList
  155    try_proxy/4.                    % +Proxy, +Addr, -Socket, -Stream
  156
  157:- predicate_options(tcp_connect/3, 3,
  158                     [ bypass_proxy(boolean),
  159                       nodelay(boolean)
  160                     ]).  161
  162:- use_foreign_library(foreign(socket), install_socket).  163:- public tcp_debug/1.                  % set debugging.

 tcp_socket(-SocketId) is det

Creates an INET-domain stream-socket and unifies an identifier to it with SocketId. On MS-Windows, if the socket library is not yet initialised, this will also initialise the library.

 tcp_close_socket(+SocketId) is det

Closes the indicated socket, making SocketId invalid. Normally, sockets are closed by closing both stream handles returned by open_socket/3. There are two cases where tcp_close_socket/1 is used because there are no stream-handles:

• If, after tcp_accept/3, the server uses fork/1 to handle the client in a sub-process. In this case the accepted socket is not longer needed from the main server and must be discarded using tcp_close_socket/1.
• If, after discovering the connecting client with tcp_accept/3, the server does not want to accept the connection, it should discard the accepted socket immediately using tcp_close_socket/1.

 tcp_open_socket(+SocketId, -StreamPair) is det

Create streams to communicate to SocketId. If SocketId is a master socket (see tcp_bind/2), StreamPair should be used for tcp_accept/3. If SocketId is a connected (see tcp_connect/2) or accepted socket (see tcp_accept/3), StreamPair is unified to a stream pair (see stream_pair/3) that can be used for reading and writing. The stream or pair must be closed with close/1, which also closes SocketId.

  197tcp_open_socket(Socket, Stream) :-
  198    tcp_open_socket(Socket, In, Out),
  199    (   var(Out)
  200    ->  Stream = In
  201    ;   stream_pair(Stream, In, Out)
  202    ).

 tcp_open_socket(+SocketId, -InStream, -OutStream) is det

Similar to tcp_open_socket/2, but creates two separate sockets where tcp_open_socket/2 would have created a stream pair.

deprecated

- New code should use tcp_open_socket/2 because closing a stream pair is much easier to perform safely.

 tcp_bind(SocketId, ?Address) is det

Bind the socket to Address on the current machine. This operation, together with tcp_listen/2 and tcp_accept/3 implement the server-side of the socket interface. Address is either an plain Port or a term HostPort. The first form binds the socket to the given port on all interfaces, while the second only binds to the matching interface. A typical example is below, causing the socket to listen only on port 8080 on the local machine's network.

  tcp_bind(Socket, localhost:8080)

If Port is unbound, the system picks an arbitrary free port and unifies Port with the selected port number. Port is either an integer or the name of a registered service. See also tcp_connect/4.

 tcp_listen(+SocketId, +BackLog) is det

Tells, after tcp_bind/2, the socket to listen for incoming requests for connections. Backlog indicates how many pending connection requests are allowed. Pending requests are requests that are not yet acknowledged using tcp_accept/3. If the indicated number is exceeded, the requesting client will be signalled that the service is currently not available. A commonly used default value for Backlog is 5.

 tcp_accept(+Socket, -Slave, -Peer) is det

This predicate waits on a server socket for a connection request by a client. On success, it creates a new socket for the client and binds the identifier to Slave. Peer is bound to the IP-address of the client.

 tcp_connect(+SocketId, +HostAndPort) is det

Connect SocketId. After successful completion, tcp_open_socket/3 can be used to create I/O-Streams to the remote socket. This predicate is part of the low level client API. A connection to a particular host and port is realised using these steps:

    tcp_socket(Socket),
    tcp_connect(Socket, Host:Port),
    tcp_open_socket(Socket, StreamPair)

Typical client applications should use the high level interface provided by tcp_connect/3 which avoids resource leaking if a step in the process fails, and can be hooked to support proxies. For example:

    setup_call_cleanup(
        tcp_connect(Host:Port, StreamPair, []),
        talk(StreamPair),
        close(StreamPair))

  275                 /*******************************
  276                 *      HOOKABLE CONNECT        *
  277                 *******************************/

 tcp_connect(+Socket, +Address, -Read, -Write) is det

Connect a (client) socket to Address and return a bi-directional connection through the stream-handles Read and Write. This predicate may be hooked by defining tcp_connect_hook/4 with the same signature. Hooking can be used to deal with proxy connections. E.g.,

:- multifile socket:tcp_connect_hook/4.

socket:tcp_connect_hook(Socket, Address, Read, Write) :-
    proxy(ProxyAdress),
    tcp_connect(Socket, ProxyAdress),
    tcp_open_socket(Socket, Read, Write),
    proxy_connect(Address, Read, Write).

deprecated

- New code should use tcp_connect/3 called as tcp_connect(+Address, -StreamPair, +Options).

  300tcp_connect(Socket, Address, Read, Write) :-
  301    tcp_connect_hook(Socket, Address, Read, Write),
  302    !.
  303tcp_connect(Socket, Address, Read, Write) :-
  304    tcp_connect(Socket, Address),
  305    tcp_open_socket(Socket, Read, Write).

 tcp_connect(+Address, -StreamPair, +Options) is det

tcp_connect(+Socket, +Address, -StreamPair) is det

Establish a TCP communication as a client. The +,-,+ mode is the preferred way for a client to establish a connection. This predicate can be hooked to support network proxies. To use a proxy, the hook proxy_for_url/3 must be defined. Permitted options are:

bypass_proxy(+Boolean)

Defaults to false. If true, do not attempt to use any proxies to obtain the connection

nodelay(+Boolean)

Defaults to false. If true, set nodelay on the resulting socket using tcp_setopt(Socket, nodelay)

The +,+,- mode is deprecated and does not support proxies. It behaves like tcp_connect/4, but creates a stream pair (see stream_pair/3).

Errors

- proxy_error(tried(ResultList)) is raised by mode (+,-,+) if proxies are defines by proxy_for_url/3 but no proxy can establsh the connection. ResultList contains one or more terms of the form false(Proxy) for a hook that simply failed or error(Proxy, ErrorTerm) for a hook that raised an exception.

See also

- library(http/http_proxy) defines a hook that allows to connect through HTTP proxies that support the CONNECT method.

  339% Main mode: +,-,+
  340tcp_connect(Address, StreamPair, Options) :-
  341    var(StreamPair),
  342    !,
  343    (   memberchk(bypass_proxy(true), Options)
  344    ->  tcp_connect_direct(Address, Socket, StreamPair)
  345    ;   findall(Result,
  346                try_a_proxy(Address, Result),
  347                ResultList),
  348        last(ResultList, Status)
  349    ->  (   Status = true(_Proxy, Socket, StreamPair)
  350        ->  true
  351        ;   throw(error(proxy_error(tried(ResultList)), _))
  352        )
  353    ;   tcp_connect_direct(Address, Socket, StreamPair)
  354    ),
  355    (   memberchk(nodelay(true), Options)
  356    ->  tcp_setopt(Socket, nodelay)
  357    ;   true
  358    ).
  359% backward compatibility mode +,+,-
  360tcp_connect(Socket, Address, StreamPair) :-
  361    tcp_connect_hook(Socket, Address, StreamPair0),
  362    !,
  363    StreamPair = StreamPair0.
  364tcp_connect(Socket, Address, StreamPair) :-
  365    tcp_connect(Socket, Address, Read, Write),
  366    stream_pair(StreamPair, Read, Write).
  367
  368
  369tcp_connect_direct(Address, Socket, StreamPair):-
  370    tcp_socket(Socket),
  371    catch(tcp_connect(Socket, Address, StreamPair),
  372          Error,
  373          ( tcp_close_socket(Socket),
  374            throw(Error)
  375          )).

 tcp_select(+ListOfStreams, -ReadyList, +TimeOut)

Same as the built-in wait_for_input/3, but integrates better with event processing and the various options of sockets for Windows. On non-windows systems this simply calls wait_for_input/3.

  384:- if(\+predicate_property(tcp_select(_,_,_), defined)).  385tcp_select(ListOfStreams, ReadyList, TimeOut) :-
  386    wait_for_input(ListOfStreams, ReadyList, TimeOut).
  387:- endif.  388
  389
  390                 /*******************************
  391                 *        PROXY SUPPORT         *
  392                 *******************************/
  393
  394try_a_proxy(Address, Result) :-
  395    format(atom(URL), 'socket://~w', [Address]),
  396    (   Address = Host:_
  397    ->  true
  398    ;   Host = Address
  399    ),
  400    proxy_for_url(URL, Host, Proxy),
  401    debug(socket(proxy), 'Socket connecting via ~w~n', [Proxy]),
  402    (   catch(try_proxy(Proxy, Address, Socket, Stream), E, true)
  403    ->  (   var(E)
  404        ->  !, Result = true(Proxy, Socket, Stream)
  405        ;   Result = error(Proxy, E)
  406        )
  407    ;   Result = false(Proxy)
  408    ),
  409    debug(socket(proxy), 'Socket: ~w: ~p', [Proxy, Result]).

 try_proxy(+Proxy, +TargetAddress, -Socket, -StreamPair) is semidet

Attempt a socket-level connection via the given proxy to TargetAddress. The Proxy argument must match the output argument of proxy_for_url/3. The predicate tcp_connect/3 (and http_open/3 from the library(http/http_open)) collect the results of failed proxies and raise an exception no proxy is capable of realizing the connection.

The default implementation recognises the values for Proxy described below. The library(http/http_proxy) adds proxy(Host,Port) which allows for HTTP proxies using the CONNECT method.

direct

Do not use any proxy

socks(Host, Port)

Use a SOCKS5 proxy

  430:- multifile
  431    try_proxy/4.  432
  433try_proxy(direct, Address, Socket, StreamPair) :-
  434    !,
  435    tcp_connect_direct(Address, Socket, StreamPair).
  436try_proxy(socks(Host, Port), Address, Socket, StreamPair) :-
  437    !,
  438    tcp_connect_direct(Host:Port, Socket, StreamPair),
  439    catch(negotiate_socks_connection(Address, StreamPair),
  440          Error,
  441          ( close(StreamPair, [force(true)]),
  442            throw(Error)
  443          )).

 proxy_for_url(+URL, +Hostname, -Proxy) is nondet

This hook can be implemented to return a proxy to try when connecting to URL. Returned proxies are tried in the order in which they are returned by the multifile hook try_proxy/4. Pre-defined proxy methods are:

direct

connect directly to the resource

proxy(Host, Port)

Connect to the resource using an HTTP proxy. If the resource is not an HTTP URL, then try to connect using the CONNECT verb, otherwise, use the GET verb.

socks(Host, Port)

Connect to the resource via a SOCKS5 proxy

These correspond to the proxy methods defined by PAC Proxy auto-config. Additional methods can be returned if suitable clauses for http:http_connection_over_proxy/6 or try_proxy/4 are defined.

  466:- multifile
  467    proxy_for_url/3.  468
  469
  470                 /*******************************
  471                 *            OPTIONS           *
  472                 *******************************/

 tcp_setopt(+SocketId, +Option) is det

Set options on the socket. Defined options are:

reuseaddr

Allow servers to reuse a port without the system being completely sure the port is no longer in use.

bindtodevice(+Device)

Bind the socket to Device (an atom). For example, the code below binds the socket to the loopback device that is typically used to realise the localhost. See the manual pages for setsockopt() and the socket interface (e.g., socket(7) on Linux) for details.

tcp_socket(Socket),
tcp_setopt(Socket, bindtodevice(lo))

nodelay

nodelay(true)

If true, disable the Nagle optimization on this socket, which is enabled by default on almost all modern TCP/IP stacks. The Nagle optimization joins small packages, which is generally desirable, but sometimes not. Please note that the underlying TCP_NODELAY setting to setsockopt() is not available on all platforms and systems may require additional privileges to change this option. If the option is not supported, tcp_setopt/2 raises a domain_error exception. See Wikipedia for details.

broadcast

UDP sockets only: broadcast the package to all addresses matching the address. The address is normally the address of the local subnet (i.e. 192.168.1.255). See udp_send/4.

dispatch(+Boolean)

In GUI environments (using XPCE or the Windows swipl-win.exe executable) this flags defines whether or not any events are dispatched on behalf of the user interface. Default is true. Only very specific situations require setting this to false.

 tcp_fcntl(+Stream, +Action, ?Argument) is det

Interface to the fcntl() call. Currently only suitable to deal switch stream to non-blocking mode using:

  tcp_fcntl(Stream, setfl, nonblock),

An attempt to read from a non-blocking stream while there is no data available returns -1 (or end_of_file for read/1), but at_end_of_stream/1 fails. On actual end-of-input, at_end_of_stream/1 succeeds.

  533tcp_fcntl(Socket, setfl, nonblock) :-
  534    !,
  535    tcp_setopt(Socket, nonblock).

 tcp_host_to_address(?HostName, ?Address) is det

Translate between a machines host-name and it's (IP-)address. If HostName is an atom, it is resolved using getaddrinfo() and the IP-number is unified to Address using a term of the format ip(Byte1,Byte2,Byte3,Byte4). Otherwise, if Address is bound to an ip(Byte1,Byte2,Byte3,Byte4) term, it is resolved by gethostbyaddr() and the canonical hostname is unified with HostName.

To be done

- This function should support more functionality provided by gethostbyaddr, probably by adding an option-list.

 gethostname(-Hostname) is det

Return the canonical fully qualified name of this host. This is achieved by calling gethostname() and return the canonical name returned by getaddrinfo().

  557                 /*******************************
  558                 *            SOCKS             *
  559                 *******************************/

 negotiate_socks_connection(+DesiredEndpoint, +StreamPair) is det

Negotiate a connection to DesiredEndpoint over StreamPair. DesiredEndpoint should be in the form of either:

• hostname : port
• ip(A,B,C,D) : port

Errors

- socks_error(Details) if the SOCKS negotiation failed.

  571negotiate_socks_connection(Host:Port, StreamPair):-
  572    format(StreamPair, '~s', [[0x5,    % Version 5
  573                               0x1,    % 1 auth method supported
  574                               0x0]]), % which is 'no auth'
  575    flush_output(StreamPair),
  576    get_byte(StreamPair, ServerVersion),
  577    get_byte(StreamPair, AuthenticationMethod),
  578    (   ServerVersion =\= 0x05
  579    ->  throw(error(socks_error(invalid_version(5, ServerVersion)), _))
  580    ;   AuthenticationMethod =:= 0xff
  581    ->  throw(error(socks_error(invalid_authentication_method(
  582                                    0xff,
  583                                    AuthenticationMethod)), _))
  584    ;   true
  585    ),
  586    (   Host = ip(A,B,C,D)
  587    ->  AddressType = 0x1,                  % IPv4 Address
  588        format(atom(Address), '~s', [[A, B, C, D]])
  589    ;   AddressType = 0x3,                  % Domain
  590        atom_length(Host, Length),
  591        format(atom(Address), '~s~w', [[Length], Host])
  592    ),
  593    P1 is Port /\ 0xff,
  594    P2 is Port >> 8,
  595    format(StreamPair, '~s~w~s', [[0x5,   % Version 5
  596                                   0x1,   % Please establish a connection
  597                                   0x0,   % reserved
  598                                   AddressType],
  599                                  Address,
  600                                  [P2, P1]]),
  601    flush_output(StreamPair),
  602    get_byte(StreamPair, _EchoedServerVersion),
  603    get_byte(StreamPair, Status),
  604    (   Status =:= 0                        % Established!
  605    ->  get_byte(StreamPair, _Reserved),
  606        get_byte(StreamPair, EchoedAddressType),
  607        (   EchoedAddressType =:= 0x1
  608        ->  get_byte(StreamPair, _),        % read IP4
  609            get_byte(StreamPair, _),
  610            get_byte(StreamPair, _),
  611            get_byte(StreamPair, _)
  612        ;   get_byte(StreamPair, Length),   % read host name
  613            forall(between(1, Length, _),
  614                   get_byte(StreamPair, _))
  615        ),
  616        get_byte(StreamPair, _),            % read port
  617        get_byte(StreamPair, _)
  618    ;   throw(error(socks_error(negotiation_rejected(Status)), _))
  619    ).
  620
  621
  622                 /*******************************
  623                 *             MESSAGES         *
  624                 *******************************/
  625
  626/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  627The C-layer generates exceptions of the  following format, where Message
  628is extracted from the operating system.
  629
  630        error(socket_error(Message), _)
  631- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
  632
  633:- multifile
  634    prolog:error_message//1.  635
  636prolog:error_message(socket_error(Message)) -->
  637    [ 'Socket error: ~w'-[Message] ].
  638prolog:error_message(socks_error(Error)) -->
  639    socks_error(Error).
  640prolog:error_message(proxy_error(tried(Tried))) -->
  641    [ 'Failed to connect using a proxy.  Tried:'-[], nl],
  642    proxy_tried(Tried).
  643
  644socks_error(invalid_version(Supported, Got)) -->
  645    [ 'SOCKS: unsupported version: ~p (supported: ~p)'-
  646      [ Got, Supported ] ].
  647socks_error(invalid_authentication_method(Supported, Got)) -->
  648    [ 'SOCKS: unsupported authentication method: ~p (supported: ~p)'-
  649      [ Got, Supported ] ].
  650socks_error(negotiation_rejected(Status)) -->
  651    [ 'SOCKS: connection failed: ~p'-[Status] ].
  652
  653proxy_tried([]) --> [].
  654proxy_tried([H|T]) -->
  655    proxy_tried(H),
  656    proxy_tried(T).
  657proxy_tried(error(Proxy, Error)) -->
  658    [ '~w: '-[Proxy] ],
  659    '$messages':translate_message(Error).
  660proxy_tried(false(Proxy)) -->
  661    [ '~w: failed with unspecified error'-[Proxy] ]