/*  Part of SWI-Prolog

    Author:        Jan Wielemaker and Anjo Anjewierden
    E-mail:        J.Wielemaker@vu.nl
    WWW:           http://www.swi-prolog.org/
    Copyright (c)  2011-2015, University of Amsterdam
                              VU University Amsterdam
    All rights reserved.

    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions
    are met:

    1. Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.

    2. Redistributions in binary form must reproduce the above copyright
       notice, this list of conditions and the following disclaimer in
       the documentation and/or other materials provided with the
       distribution.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
    FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
    COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
    BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
    POSSIBILITY OF SUCH DAMAGE.
*/

:- module(prolog_breakpoints,
          [ set_breakpoint/4,           % +File, +Line, +CharPos, -Id
            set_breakpoint/5,           % +Owner, +File, +Line, +CharPos, -Id
            delete_breakpoint/1,        % +Id
            breakpoint_property/2       % ?Id, ?Property
          ]).
:- use_module(prolog_clause).
:- use_module(library(debug)).
:- use_module(library(error)).


/** <module> Manage Prolog break-points

This module provides an  interface  for   development  tools  to set and
delete break-points, giving a location in  the source. Development tools
that want to track changes to   breakpoints must use user:message_hook/3
to intercept these message terms:

  * breakpoint(set, Id)
  * breakpoint(delete, Id)

Note that the hook must fail  after   creating  its side-effects to give
other hooks the opportunity to react.
*/

:- dynamic
    user:prolog_event_hook/1.
:- multifile
    user:prolog_event_hook/1.

%!  set_breakpoint(+File, +Line, +Char, -Id) is det.
%!  set_breakpoint(+Owner, +File, +Line, +Char, -Id) is det.
%
%   Put a breakpoint at the  indicated   source-location.  File is a
%   current sourcefile (as reported by   source_file/1). Line is the
%   1-based line in which Char  is.  Char   is  the  position of the
%   break.
%
%   First, '$clause_from_source'/4 uses the SWI-Prolog clause-source
%   information to find  the  last   clause  starting  before  Line.
%   '$break_pc' generated (on backtracking),  a   list  of  possible
%   break-points.
%
%   Note that in addition to  setting   the  break-point, the system
%   must be in debug mode. With threading enabled, there are various
%   different ways this may  be  done.   See  debug/0,  tdebug/0 and
%   tdebug/1. Therefore, this predicate  does   *not*  enable  debug
%   mode.
%
%   @arg  Owner  denotes  the   file    that   _owns_   the  clause.
%   set_breakpoint/5 is used to set breakpoints  in an included file
%   in   the   context    of    the     Owner    main    file.   See
%   source_file_property/2.

set_breakpoint(File, Line, Char, Id) :-
    set_breakpoint(File, File, Line, Char, Id).
set_breakpoint(Owner, File, Line, Char, Id) :-
    debug(break, 'break_at(~q, ~d, ~d).', [File, Line, Char]),
    '$clause_from_source'(Owner, File, Line, ClauseRef),
    clause_info(ClauseRef, InfoFile, TermPos, _NameOffset),
    (   InfoFile == File
    ->  '$break_pc'(ClauseRef, PC, NextPC),
        debug(break, 'Clause ~p, PC=~p NextPC=~p', [ClauseRef, PC, NextPC]),
        '$clause_term_position'(ClauseRef, NextPC, List),
        debug(break, 'Location = ~w', [List]),
        range(List, TermPos, _0A, Z),
        debug(break, 'Term from ~w-~w', [_0A, Z]),
        Z >= Char, !
    ;   format('Failed to unify clause ~p, using first break',
               [ClauseRef]),
        '$break_pc'(ClauseRef, PC, _), !
    ),
    debug(break, 'Break at clause ~w, PC=~w', [ClauseRef, PC]),
    with_mutex('$break', next_break_id(Id)),
    Location = file_position(File, Line, Char),
    asserta(known_breakpoint(ClauseRef, PC, Location, Id), Ref),
    catch('$break_at'(ClauseRef, PC, true), E,
          (erase(Ref), throw(E))).


range(_,  Pos, _, _) :-
    var(Pos), !, fail.
range([], Pos, A, Z) :-
    arg(1, Pos, A),
    arg(2, Pos, Z).
range([H|T], term_position(_, _, _, _, PosL), A, Z) :-
    nth1(H, PosL, Pos),
    range(T, Pos, A, Z).

:- dynamic
    known_breakpoint/4,             %
    break_id/1.

next_break_id(Id) :-
    retract(break_id(Id0)),
    !,
    Id is Id0+1,
    asserta(break_id(Id)).
next_break_id(1) :-
    asserta(break_id(1)).

%!  delete_breakpoint(+Id) is det.
%
%   Delete   breakpoint   with    given     Id.    If    successful,
%   print_message(breakpoint(delete, Id)) is called.   Message hooks
%   working on this message may still call breakpoint_property/2.
%
%   @error existence_error(breakpoint, Id).

delete_breakpoint(Id) :-
    integer(Id),
    known_breakpoint(ClauseRef, PC, _Location, Id),
    !,
    '$break_at'(ClauseRef, PC, false).
delete_breakpoint(Id) :-
    existence_error(breakpoint, Id).

%!  breakpoint_property(?Id, ?Property) is nondet.
%
%   True when Property is a property of the breakpoint Id.  Defined
%   properties are:
%
%       * file(File)
%       Provided if the breakpoint is in a clause associated to a
%       file.  May not be known.
%       * line_count(Line)
%       Line of the breakpoint.  May not be known.
%       * character_range(Start, Len)
%       One-based character offset of the break-point.  May not be
%       known.
%       * clause(Reference)
%       Reference of the clause in which the breakpoint resides.

breakpoint_property(Id, file(File)) :-
    known_breakpoint(ClauseRef,_,_,Id),
    clause_property(ClauseRef, file(File)).
breakpoint_property(Id, line_count(Line)) :-
    known_breakpoint(_,_,Location,Id),
    location_line(Location, Line).
breakpoint_property(Id, character_range(Start, Len)) :-
    known_breakpoint(ClauseRef,PC,_,Id),
    (   known_breakpoint(_,_,file_character_range(Start,Len),Id)
    ;   break_location(ClauseRef, PC, _File, Start-End),
        Len is End+1-Start
    ).
breakpoint_property(Id, clause(Reference)) :-
    known_breakpoint(Reference,_,_,Id).

location_line(file_position(_File, Line, _Char), Line).
location_line(file_character_range(File, Start, _Len), Line) :-
    file_line(File, Start, Line).
location_line(file_line(_File, Line), Line).


%!  file_line(+File, +StartIndex, -Line) is det.
%
%   True when Line is the  1-based  line   offset  in  which we find
%   character StartIndex.

file_line(File, Start, Line) :-
    setup_call_cleanup(
        open(File, read, In),
        stream_line(In, Start, 1, Line),
        close(In)).

stream_line(In, _, Line0, Line) :-
    at_end_of_stream(In),
    !,
    Line = Line0.
stream_line(In, Index, Line0, Line) :-
    skip(In, 0'\n),
    character_count(In, At),
    (   At > Index
    ->  Line = Line0
    ;   Line1 is Line0+1,
        stream_line(In, Index, Line1, Line)
    ).


                 /*******************************
                 *            FEEDBACK          *
                 *******************************/

user:prolog_event_hook(break(ClauseRef, PC, Set)) :-
    break(Set, ClauseRef, PC).

break(true, ClauseRef, PC) :-
    known_breakpoint(ClauseRef, PC, _Location, Id),
    !,
    print_message(informational, breakpoint(set, Id)).
break(true, ClauseRef, PC) :-
    !,
    debug(break, 'Trap in Clause ~p, PC ~d', [ClauseRef, PC]),
    with_mutex('$break', next_break_id(Id)),
    (   break_location(ClauseRef, PC, File, A-Z)
    ->  Len is Z+1-A,
        Location = file_character_range(File, A, Len)
    ;   clause_property(ClauseRef, file(File)),
        clause_property(ClauseRef, line_count(Line))
    ->  Location = file_line(File, Line)
    ;   Location = unknown
    ),
    asserta(known_breakpoint(ClauseRef, PC, Location, Id)),
    print_message(informational, breakpoint(set, Id)).
break(false, ClauseRef, PC) :-
    debug(break, 'Remove breakpoint from ~p, PC ~d', [ClauseRef, PC]),
    clause(known_breakpoint(ClauseRef, PC, _Location, Id), true, Ref),
    call_cleanup(print_message(informational, breakpoint(delete, Id)),
                 erase(Ref)).

%!  break_location(+ClauseRef, +PC, -File, -AZ) is det.
%
%   True when File and AZ represent the  location of the goal called
%   at PC in ClauseRef.
%
%   @param AZ is a term A-Z, where   A and Z are character positions
%   in File.

break_location(ClauseRef, PC, File, A-Z) :-
    clause_info(ClauseRef, File, TermPos, _NameOffset),
    '$fetch_vm'(ClauseRef, PC, NPC, _VMI),
    '$clause_term_position'(ClauseRef, NPC, List),
    debug(break, 'ClausePos = ~w', [List]),
    range(List, TermPos, A, Z),
    debug(break, 'Range: ~d .. ~d', [A, Z]).


                 /*******************************
                 *            MESSAGES          *
                 *******************************/

:- multifile
    prolog:message/3.

prolog:message(breakpoint(SetClear, Id)) -->
    setclear(SetClear),
    breakpoint(Id).

setclear(set) -->
    ['Breakpoint '].
setclear(delete) -->
    ['Deleted breakpoint '].

breakpoint(Id) -->
    breakpoint_name(Id),
    (   { breakpoint_property(Id, file(File)),
          file_base_name(File, Base),
          breakpoint_property(Id, line_count(Line))
        }
    ->  [ ' at ~w:~d'-[Base, Line] ]
    ;   []
    ).

breakpoint_name(Id) -->
    { breakpoint_property(Id, clause(ClauseRef)) },
    (   { clause_property(ClauseRef, erased) }
    ->  ['~w'-[Id]]
    ;   { clause_name(ClauseRef, Name) },
        ['~w in ~w'-[Id, Name]]
    ).