/* Part of SWI-Prolog Author: Jan Wielemaker E-mail: J.Wielemaker@vu.nl WWW: http://www.swi-prolog.org Copyright (c) 1985-2017, University of Amsterdam VU University Amsterdam All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ :- module(backward_compatibility, [ '$arch'/2, '$version'/1, '$home'/1, '$argv'/1, '$set_prompt'/1, '$strip_module'/3, '$declare_module'/3, '$module'/2, at_initialization/1, % :Goal displayq/1, displayq/2, sformat/2, % -String, +Fmt sformat/3, % -String, +Fmt, +Args concat/3, concat_atom/2, % +List, -Atom concat_atom/3, % +List, +Sep, -Atom '$apropos_match'/2, % +Needle, +Hashstack read_clause/1, % -Term read_clause/2, % +Stream, -Term read_variables/2, % -Term, -VariableNames read_variables/3, % +Stream, -Term, -VariableNames read_pending_input/3, % +Stream, -List, ?Tail feature/2, set_feature/2, substring/4, string_to_list/2, % ?String, ?Codes string_to_atom/2, % ?String, ?Atom flush/0, write_ln/1, % +Term proper_list/1, % @Term free_variables/2, % +Term, -Variables subsumes_chk/2, % @Generic, @Specific subsumes/2, % @Generic, @Specific hash_term/2, % +Term, -Hash checklist/2, % :Goal, +List sublist/3, % :Goal, +List, -Sublist sumlist/2, % +List, -Sum convert_time/2, % +Stamp, -String convert_time/8, % +String, -YMDmhs.ms 'C'/3, % +List, -Head, -Tail current_thread/2, % ?Thread, ?Status current_mutex/3, % ?Mutex, ?Owner, ?Count message_queue_size/2, % +Queue, -TermsWaiting lock_predicate/2, % +Name, +Arity unlock_predicate/2, % +Name, +Arity current_module/2, % ?Module, ?File export_list/2, % +Module, -Exports setup_and_call_cleanup/3, % :Setup, :Goal, :Cleanup setup_and_call_cleanup/4, % :Setup, :Goal, ?Catcher, :Cleanup merge/3, % +List1, +List2, -Union merge_set/3, % +Set1, +Set2, -Union index/1, % :Head hash/1, % :PI set_base_module/1, % :Base eval_license/0, trie_insert_new/3 % +Trie, +Term, -Node ]). :- use_module(apply, [maplist/2]). :- use_module(system, [lock_predicate/1, unlock_predicate/1]). :- use_module(lists, [sum_list/2]). :- meta_predicate at_initialization(0), setup_and_call_cleanup(0,0,0), setup_and_call_cleanup(0,0,?,0), checklist(1, +), sublist(1, +, ?), index(:), hash(:), set_base_module(:). /** Backward compatibility This library defines predicates that used to exist in older version of SWI-Prolog, but are considered obsolete as there functionality is neatly covered by new features. Most often, these constructs are superceeded by ISO-standard compliant predicates. Please also note the existence of quintus.pl and edinburgh.pl for more compatibility predicates. @see gxref/0 can be used to find files that import from library(backcomp) and thus reply on deprecated features. */ %! '$arch'(-Architecture, -Version) is det. % % @deprecated use current_prolog_flag(arch, Architecture) '$arch'(Arch, unknown) :- current_prolog_flag(arch, Arch). %! '$version'(Version:integer) is det. % % @deprecated use current_prolog_flag(version, Version) '$version'(Version) :- current_prolog_flag(version, Version). %! '$home'(-SWIPrologDir) is det. % % @deprecated use current_prolog_flag(home, SWIPrologDir) % @see file_search_path/2, absolute_file_name/3, The Prolog home % directory is available through the alias =swi=. '$home'(Home) :- current_prolog_flag(home, Home). %! '$argv'(-Argv:list) is det. % % @deprecated use current_prolog_flag(os_argv, Argv) or % current_prolog_flag(argv, Argv) '$argv'(Argv) :- current_prolog_flag(os_argv, Argv). %! '$set_prompt'(+Prompt) is det. % % Set the prompt for the toplevel % % @deprecated use set_prolog_flag(toplevel_prompt, Prompt). '$set_prompt'(Prompt) :- ( is_list(Prompt) -> Prompt0 = Prompt ; atom_codes(Prompt, Prompt0) ), maplist(percent_to_tilde, Prompt0, Prompt1), atom_codes(Atom, Prompt1), set_prolog_flag(toplevel_prompt, Atom). percent_to_tilde(0'%, 0'~) :- !. percent_to_tilde(X, X). %! displayq(@Term) is det. %! displayq(+Stream, @Term) is det. % % Write term ignoring operators and quote atoms. % % @deprecated Use write_term/3 or write_canonical/2. displayq(Term) :- write_term(Term, [ignore_ops(true),quoted(true)]). displayq(Stream, Term) :- write_term(Stream, Term, [ignore_ops(true),quoted(true)]). %! sformat(-String, +Format, +Args) is det. %! sformat(-String, +Format) is det. % % @deprecated Use format/3 as =|format(string(String), ...)|= :- module_transparent sformat/2, sformat/3. sformat(String, Format) :- format(string(String), Format, []). sformat(String, Format, Arguments) :- format(string(String), Format, Arguments). %! concat(+Atom1, +Atom2, -Atom) is det. % % @deprecated Use ISO atom_concat/3 concat(A, B, C) :- atom_concat(A, B, C). %! concat_atom(+List, -Atom) is det. % % Concatenate a list of atomic values to an atom. % % @deprecated Use atomic_list_concat/2 as proposed by the prolog % commons initiative. concat_atom([A, B], C) :- !, atom_concat(A, B, C). concat_atom(L, Atom) :- atomic_list_concat(L, Atom). %! concat_atom(+List, +Seperator, -Atom) is det. % % Concatenate a list of atomic values to an atom, inserting Seperator % between each consecutive elements. % % @deprecated Use atomic_list_concat/3 as proposed by the prolog % commons initiative. concat_atom(L, Sep, Atom) :- atomic_list_concat(L, Sep, Atom). %! '$apropos_match'(+Needle, +Haystack) is semidet. % % True if Needle is a sub atom of Haystack. Ignores the case % of Haystack. '$apropos_match'(Needle, Haystack) :- sub_atom_icasechk(Haystack, _, Needle). %! read_clause(-Term) is det. % % @deprecated Use read_clause/3 or read_term/3. read_clause(Term) :- read_clause(current_input, Term). %! read_clause(+Stream, -Term) is det. % % @deprecated Use read_clause/3 or read_term/3. read_clause(Stream, Term) :- read_clause(Stream, Term, [process_comment(false)]). %! read_variables(-Term, -Bindings) is det. %! read_variables(+In:stream, -Term, -Bindings) is det. % % @deprecated Use ISO read_term/2 or read_term/3. read_variables(Term, Vars) :- read_term(Term, [variable_names(Vars)]). read_variables(Stream, Term, Vars) :- read_term(Stream, Term, [variable_names(Vars)]). %! read_pending_input(+Stream, -Codes, ?Tail) is det. % % @deprecated Use read_pending_codes/3. read_pending_input(Stream, Codes, Tail) :- read_pending_codes(Stream, Codes, Tail). %! feature(?Key, ?Value) is nondet. %! set_feature(+Key, @Term) is det. % % Control Prolog flags. % % @deprecated Use ISO current_prolog_flag/2 and set_prolog_flag/2. feature(Key, Value) :- current_prolog_flag(Key, Value). set_feature(Key, Value) :- set_prolog_flag(Key, Value). %! substring(+String, +Offset, +Length, -Sub) % % Predecessor of sub_string using 1-based Offset. % % @deprecated Use sub_string/5. substring(String, Offset, Length, Sub) :- Offset0 is Offset - 1, sub_string(String, Offset0, Length, _After, Sub). %! string_to_list(?String, ?Codes) is det. % % Bi-directional conversion between a string and a list of % character codes. % % @deprecated Use string_codes/2. string_to_list(String, Codes) :- string_codes(String, Codes). %! string_to_atom(?String, ?Atom) is det. % % Bi-directional conversion between string and atom. % % @deprecated Use atom_string/2. Note that the order of the % arguments is reversed. string_to_atom(Atom, String) :- atom_string(String, Atom). %! flush is det. % % @deprecated use ISO flush_output/0. flush :- flush_output. %! write_ln(X) is det % % @deprecated Use writeln(X). write_ln(X) :- writeln(X). %! proper_list(+List) % % Old SWI-Prolog predicate to check for a list that really ends % in a []. There is not much use for the quick is_list, as in % most cases you want to process the list element-by-element anyway. % % @deprecated Use ISO is_list/1. proper_list(List) :- is_list(List). %! free_variables(+Term, -Variables) % % Return a list of unbound variables in Term. The name % term_variables/2 is more widely used. % % @deprecated Use term_variables/2. free_variables(Term, Variables) :- term_variables(Term, Variables). %! subsumes_chk(@Generic, @Specific) % % True if Generic can be made equivalent to Specific without % changing Specific. % % @deprecated Replace by subsumes_term/2. subsumes_chk(Generic, Specific) :- subsumes_term(Generic, Specific). %! subsumes(+Generic, @Specific) % % True if Generic is unified to Specific without changing % Specific. % % @deprecated It turns out that calls to this predicate almost % always should have used subsumes_term/2. Also the name is % misleading. In case this is really needed, one is adviced to % follow subsumes_term/2 with an explicit unification. subsumes(Generic, Specific) :- subsumes_term(Generic, Specific), Generic = Specific. %! hash_term(+Term, -Hash) is det. % % If Term is ground, Hash is unified to an integer representing % a hash for Term. Otherwise Hash is left unbound. % % @deprecated Use term_hash/2. hash_term(Term, Hash) :- term_hash(Term, Hash). %! checklist(:Goal, +List) % % @deprecated Use maplist/2 checklist(Goal, List) :- maplist(Goal, List). %! sublist(:Goal, +List1, ?List2) % % Succeeds if List2 unifies with a list holding those terms for wich % call(Goal, Elem) succeeds. % % @deprecated Use include/3 from library(apply) % @compat DEC10 library sublist(_, [], []) :- !. sublist(Goal, [H|T], Sub) :- call(Goal, H), !, Sub = [H|R], sublist(Goal, T, R). sublist(Goal, [_|T], R) :- sublist(Goal, T, R). %! sumlist(+List, -Sum) is det. % % True when Sum is the list of all numbers in List. % % @deprecated Use sum_list/2 sumlist(List, Sum) :- sum_list(List, Sum). %! '$strip_module'(+Term, -Module, -Plain) % % This used to be an internal predicate. It was added to the XPCE % compatibility library without $ and since then used at many % places. From 5.4.1 onwards strip_module/3 is built-in and the $ % variation is added here for compatibility. % % @deprecated Use strip_module/3. :- module_transparent '$strip_module'/3. '$strip_module'(Term, Module, Plain) :- strip_module(Term, Module, Plain). %! '$module'(-OldTypeIn, +NewTypeIn) '$module'(OldTypeIn, NewTypeIn) :- '$current_typein_module'(OldTypeIn), '$set_typein_module'(NewTypeIn). %! '$declare_module'(Module, File, Line) % % Used in triple20 particle library. Should use a public interface '$declare_module'(Module, File, Line) :- '$declare_module'(Module, user, user, File, Line, false). %! at_initialization(:Goal) is det. % % Register goal only to be run if a saved state is restored. % % @deprecated Use initialization(Goal, restore) at_initialization(Goal) :- initialization(Goal, restore). %! convert_time(+Stamp, -String) % % Convert a time-stamp as obtained though get_time/1 into a textual % representation using the C-library function ctime(). The value is % returned as a SWI-Prolog string object (see section 4.23). See % also convert_time/8. % % @deprecated Use format_time/3. convert_time(Stamp, String) :- format_time(string(String), '%+', Stamp). %! convert_time(+Stamp, -Y, -Mon, -Day, -Hour, -Min, -Sec, -MilliSec) % % Convert a time stamp, provided by get_time/1, time_file/2, % etc. Year is unified with the year, Month with the month number % (January is 1), Day with the day of the month (starting with 1), % Hour with the hour of the day (0--23), Minute with the minute % (0--59). Second with the second (0--59) and MilliSecond with the % milliseconds (0--999). Note that the latter might not be accurate % or might always be 0, depending on the timing capabilities of the % system. See also convert_time/2. % % @deprecated Use stamp_date_time/3. convert_time(Stamp, Y, Mon, Day, Hour, Min, Sec, MilliSec) :- stamp_date_time(Stamp, date(Y, Mon, Day, Hour, Min, FSec, _, _, _), local), Sec is integer(float_integer_part(FSec)), MilliSec is integer(float_fractional_part(FSec)*1000). %! 'C'(?List, ?Head, ?Tail) is det. % % Used to be generated by DCG. Some people appear to be using in % in normal code too. % % @deprecated Do not use in normal code; DCG no longer generates it. 'C'([H|T], H, T). %! current_thread(?Thread, ?Status) is nondet. % % @deprecated Replaced by thread_property/2 current_thread(Thread, Status) :- nonvar(Thread), !, catch(thread_property(Thread, status(Status)), error(existence_error(thread, _), _), fail). current_thread(Thread, Status) :- thread_property(Thread, status(Status)). %! current_mutex(?Mutex, ?Owner, ?Count) is nondet. % % @deprecated Replaced by mutex_property/2 current_mutex(Mutex, Owner, Count) :- nonvar(Mutex), !, catch(mutex_property(Mutex, status(Status)), error(existence_error(mutex, _), _), fail), map_mutex_status(Status, Owner, Count). current_mutex(Mutex, Owner, Count) :- mutex_property(Mutex, status(Status)), map_mutex_status(Status, Owner, Count). map_mutex_status(unlocked, [], 0). map_mutex_status(locked(Owner, Count), Owner, Count). %! message_queue_size(+Queue, -Size) is det. % % True if Queue holds Size terms. % % @deprecated Please use message_queue_property(Queue, Size) message_queue_size(Queue, Size) :- message_queue_property(Queue, size(Size)). %! lock_predicate(+Name, +Arity) is det. %! unlock_predicate(+Name, +Arity) is det. % % @deprecated see lock_predicate/1 and unlock_predicate/1. :- module_transparent lock_predicate/2, unlock_predicate/2. lock_predicate(Name, Arity) :- lock_predicate(Name/Arity). unlock_predicate(Name, Arity) :- unlock_predicate(Name/Arity). %! current_module(?Module, ?File) is nondet. % % True if Module is a module loaded from File. % % @deprecated Use module_property(Module, file(File)) current_module(Module, File) :- module_property(Module, file(File)). %! export_list(+Module, -List) is det. % % Module exports the predicates of List. % % @deprecated Use module_property(Module, exports(List)) export_list(Module, List) :- module_property(Module, exports(List)). %! setup_and_call_cleanup(:Setup, :Goal, :Cleanup). % % Call Cleanup once after Goal is finished. % % @deprecated Use setup_call_cleanup/3. setup_and_call_cleanup(Setup, Goal, Cleanup) :- setup_call_cleanup(Setup, Goal, Cleanup). %! setup_and_call_cleanup(:Setup, :Goal, Catcher, :Cleanup). % % Call Cleanup once after Goal is finished, with Catcher % unified to the reason % % @deprecated Use setup_call_cleanup/3. setup_and_call_cleanup(Setup, Goal, Catcher, Cleanup) :- setup_call_catcher_cleanup(Setup, Goal, Catcher,Cleanup). %! merge_set(+Set1, +Set2, -Set3) % % Merge the ordered sets Set1 and Set2 into a new ordered set % without duplicates. % % @deprecated New code should use ord_union/3 from % library(ordsets) merge_set([], L, L) :- !. merge_set(L, [], L) :- !. merge_set([H1|T1], [H2|T2], [H1|R]) :- H1 @< H2, !, merge_set(T1, [H2|T2], R). merge_set([H1|T1], [H2|T2], [H2|R]) :- H1 @> H2, !, merge_set([H1|T1], T2, R). merge_set([H1|T1], [H2|T2], [H1|R]) :- H1 == H2, merge_set(T1, T2, R). %! merge(+List1, +List2, -List3) % % Merge the ordered sets List1 and List2 into a new ordered list. % Duplicates are not removed and their order is maintained. % % @deprecated The name of this predicate is far too general for % a rather specific function. merge([], L, L) :- !. merge(L, [], L) :- !. merge([H1|T1], [H2|T2], [H|R]) :- ( H1 @=< H2 -> H = H1, merge(T1, [H2|T2], R) ; H = H2, merge([H1|T1], T2, R) ). %! index(:Head) is det. % % Prepare the predicate indicated by Head for multi-argument % indexing. % % @deprecated As of version 5.11.29, SWI-Prolog performs % just-in-time indexing on all arguments. index(Head) :- print_message(warning, decl_no_effect(index(Head))). %! hash(:PredInd) is det. % % Demands PredInd to be indexed using a hash-table. This is % handled dynamically. hash(PI) :- print_message(warning, decl_no_effect(hash(PI))). %! set_base_module(:Base) is det. % % Set the default module from whic we inherit. % % @deprecated Equivalent to set_module(base(Base)). set_base_module(M:Base) :- set_module(M:base(Base)). %! eval_license is det. % % @deprecated Equivalent to license/0 eval_license :- license. %! trie_insert_new(+Trie, +Term, -Handle) is semidet. % % @deprecated use trie_insert/4. trie_insert_new(Trie, Term, Handle) :- trie_insert(Trie, Term, [], Handle).